[Fixed] Hotspot Mode - Call not initially updated
[Fixed] Hotspot Mode - Call not initially updated
Noticed that after a voip network call has ended, the next incoming call first gets identified with the prior voice packet call sign, and then quickly gets updated to the current incoming call sign.
This should be blank until the current call lookup has completed.
It is blank between incoming calls.
This should be blank until the current call lookup has completed.
It is blank between incoming calls.
Re: Hotspot Mode - Call not initially updated
Hi Marc,
Cheers.
---
Daniel
What is the hotspot version you're running ?kd2lh wrote: ↑Mon Jan 27, 2020 4:15 pmNoticed that after a voip network call has ended, the next incoming call first gets identified with the prior voice packet call sign, and then quickly gets updated to the current incoming call sign.
This should be blank until the current call lookup has completed.
It is blank between incoming calls.
Cheers.
---
Daniel
Re: Hotspot Mode - Call not initially updated
It's the last 1/22 version file name opengd77_202001231943.sgl.
I am running a long term test (taking video of the display awaiting one of the auto restarts I've observed) but can stop the test and get the internal version code if needed.
Marc
I am running a long term test (taking video of the display awaiting one of the auto restarts I've observed) but can stop the test and get the internal version code if needed.
Marc
Re: Hotspot Mode - Call not initially updated
Hi Mark,
Cheers.
---
Daniel
To get the hotspot version, press the black button while hotspot is running.
Cheers.
---
Daniel
Re: Hotspot Mode - Call not initially updated
Hitting the black button takes it out of Hotspot mode.
That just shows the active freq, CTSS status and Squelch status on my radio.
The other failure occurred last night, so I can use the menu.
Built 1/23/2020
10:03:40
[3bab51e]
That just shows the active freq, CTSS status and Squelch status on my radio.
The other failure occurred last night, so I can use the menu.
Built 1/23/2020
10:03:40
[3bab51e]
Re: Hotspot Mode - Call not initially updated
Hi Marc,
No, there is definitely something wrong here. I see no reason for this.
Sorry, I can't remember, but if your using Pi-Star, but the only reason the could make the hotspot to stops, and put the GD back to Channel/VFO is (and only) when MMDVMHost stops to communicate, for 10s (if hotspot mode is set to MMDVM, as it should, and not BlueDV).
Pressing the black button only changes what is displayed on the screen (nothing/contact name or hostpot code version).
About the GD reboot, we discussed with Roger about that, and perhaps there is something that could trigger the watchdog when RXing really high BER frames.
Cheers.
---
Daniel
What ?!
No, there is definitely something wrong here. I see no reason for this.
Sorry, I can't remember, but if your using Pi-Star, but the only reason the could make the hotspot to stops, and put the GD back to Channel/VFO is (and only) when MMDVMHost stops to communicate, for 10s (if hotspot mode is set to MMDVM, as it should, and not BlueDV).
Pressing the black button only changes what is displayed on the screen (nothing/contact name or hostpot code version).
About the GD reboot, we discussed with Roger about that, and perhaps there is something that could trigger the watchdog when RXing really high BER frames.
Cheers.
---
Daniel
Re: Hotspot Mode - Call not initially updated
Not happening here, Daniel. Black button shows hotspot version.
Mark, IMHO you might have problems with USB port, cable, or plugs on GD77.
BTW, my oldest Raspberry Pi Zero W died, so I had no spare for GD77 hotspot to test. Used 3A+, which is now in my Duplex Jumbo Spot. In the meantime I got two more 3A+, one for GD77 and one spare. Now starting long term test to see if I'll have those bugs (this one and the other one reported here: https://www.opengd77.com/viewtopic.php?f=11&t=560).
Re: Hotspot Mode - Call not initially updated
This thread is about the updating of the incoming call on the GD77 screen, not the other problem I reported about the GD77 resetting itself.
The black button worked right now, and shows version V0.0.82 as is displayed on the FW field of the PiStar desktop.
This was not the behavior after the failure, which I described in an earlier post.
The black button worked right now, and shows version V0.0.82 as is displayed on the FW field of the PiStar desktop.
This was not the behavior after the failure, which I described in an earlier post.
Re: Hotspot Mode - Call not initially updated
Hi Marc,
Cheers.
---
Daniel
0.0.82 is quite old, a lot of bugfixes has been done since then. Can you try with the latest version Roger published, or an even newer from myself here ?.kd2lh wrote: ↑Tue Jan 28, 2020 7:18 pmThis thread is about the updating of the incoming call on the GD77 screen, not the other problem I reported about the GD77 resetting itself.
The black button worked right now, and shows version V0.0.82 as is displayed on the FW field of the PiStar desktop.
This was not the behavior after the failure, which I described in an earlier post.
Cheers.
---
Daniel
Re: Hotspot Mode - Call not initially updated
Will do. i'll try the 1/29 version first.