Not without opening the radio, and the radio is glued together and it is hard to open and then to re-assemble, and can easilty be damaged
Does the radio support Tier 2 DMR (TS1/ TS2) with the official firmware
Not without opening the radio, and the radio is glued together and it is hard to open and then to re-assemble, and can easilty be damaged
"repeaters" are always Tier 2, so the radio this person has, is Tier 2. i.e its the same radio as the RD-5R.
Sounds like you are using the official firmware in your baofengDL9HAM wrote: ↑Sun Feb 26, 2023 5:42 pmWell, the DM-5R does not work with my hotspot in simplex FM, when I use the standard way of operating, i.e. select the channel and cc, and TS2, my Anytone AT-D878 works, the DM5R only, when I select DCDM in the CPS for this channel. It did not work in openGD77 either. Now since I found out about this DCDM-Option (I am not saying, this DCDM in Baofeng Lingo is what it is in Motorola terms) in the DM-5R CPS, I could get my DM-5R to work with my simplex hotspot. What I saw is, I can select the TS2 in simplex, confirmed with my Anytone, which confirms TS2 transmission. If I deselect DCDM, it makes no difference, which TS I select, Anytone always reports TS1. So again, my Anytone doesnt have any problem (hence anytone ) txing in TS2 on simplex channels, Baofeng needs DCDM selected to do that. At least this is what it looks like to me.
Regards from Hamburg, DL9HAM, Michael