New GD77 Beta - August 3 2022

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

New GD77 Beta - August 3 2022

Post by VK3KYY » Tue Aug 02, 2022 10:29 pm

There is a new GD77/DM1801/RD5R Beta version available

downloads/GD77/bca0d61bd5cc483853496e8bf0a4ee1b1d0e94bd

There were a few mistakes in the last Beta.

* The Channel mode , Reverse Repeater Lock function (Long press of #), had somehow been removed.
* The RD5R version was not fully updated in the last Beta because a problem prevented that version being compiled and I didn't notice that the binary had not been updated.

W1CY
Posts: 76
Joined: Sun Jan 12, 2020 6:57 pm

Re: New GD77 Beta - August 3 2022

Post by W1CY » Wed Aug 03, 2022 1:55 pm

Thanks!

IZ2EIB
Posts: 161
Joined: Sat Nov 30, 2019 12:55 pm

Re: New GD77 Beta - August 3 2022

Post by IZ2EIB » Wed Aug 03, 2022 8:48 pm

Thanks a lot Roger!

73 best regards de Fabio IZ2EIB

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: New GD77 Beta - August 3 2022

Post by m1dyp » Fri Aug 05, 2022 7:36 am

thank you

n7rde
Posts: 13
Joined: Sat Nov 16, 2019 5:34 pm

Re: New GD77 Beta - August 3 2022

Post by n7rde » Fri Aug 05, 2022 4:20 pm

Thanks
Seems to work great
Ron N7RDE

I1KDO
Posts: 27
Joined: Sat Nov 16, 2019 7:49 am

Re: New GD77 Beta - August 3 2022

Post by I1KDO » Mon Aug 08, 2022 9:43 pm

Hi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions

Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off

See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Tue Aug 09, 2022 12:04 am

I1KDO wrote:
Mon Aug 08, 2022 9:43 pm
Hi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions

Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off

See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo
Changes to TS by pressing * are always to both Tx and Rx. Operating the radio where the Rx and Tx TS are different is totally non standard.
Your suggestion would remove fundamental functionality.

I1KDO
Posts: 27
Joined: Sat Nov 16, 2019 7:49 am

Re: New GD77 Beta - August 3 2022

Post by I1KDO » Tue Aug 09, 2022 8:27 pm

HI Roger
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible

Tnx
73 Lorenz

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Tue Aug 09, 2022 9:11 pm

I1KDO wrote:
Tue Aug 09, 2022 8:27 pm
HI Roger
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible

Tnx
73 Lorenz
OK.

You mean,
Long press * in DMR mode to toggle TS filter

I think possibly long press * already has the function to disable the TS override

When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS
E.g.

Channel A is TS 2
Channel B is TS 1

If you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)

To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *

I1KDO
Posts: 27
Joined: Sat Nov 16, 2019 7:49 am

Re: New GD77 Beta - August 3 2022

Post by I1KDO » Wed Aug 10, 2022 10:08 pm

When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS, ......

in this function it is also possible to disable the Filter so that it is exclusively on the desired TS and no longer receives the other?

Post Reply