A local utility company I scan uses insanely long talkgroups that get jumbled up in the last heard time. Would it be possible to have these scroll side to side either automatically or with the left and right keys? (see attached image)
Now these are transmissions on what I think is a tier III repeater or something... I'm still just scratching the surface on this stuff though. Another thing I've noticed is the RX light comes on when on the repeater channel because its data transmissions are near constant. Scanning over the channel seems to pause a little longer, but seems to only hold when someone is using voice communications, but I thought it was interesting, and maybe information that is relevant. (Yes, I know its not a tier 3 firmware etc. etc., but I've heard the utility company communications during storms on service outages and repair status, so this is why I monitor)
Here's what DSD+ captures from the repeater that triggers the 'rx' light.
Code: Select all
Sync:+DMR
(data cut)]
(data cut)]
+DMR slot2 BS DATA ERR1 DCC=1 Idle ERR15
+DMR slot1 BS DATA ERR2 DCC=1 CSBK ERR5 ECC FAIL
Activity update: Slot1=Indiv Data Slot2=No Activity
+DMR slot2 BS DATA ERR2 DCC=1 Idle ERR11
+DMR slot1 BS DATA ERR2 DCC=1 CSBK ERR8 ECC FAIL
+DMR slot2 BS DATA ERR1 DCC=1 Idle ERR16
+DMR slot1 BS DATA ERR2 DCC=1 CSBK ERR7 Preamble 8001 Tgt=(data cut)] Src=(data cut)]
[LB=1 CSBKO=61 (Preamble) FID=0 v16=8001 id1=(data cut)] id2=(data cut)]
(data cut)]
101(data cut)]
CACH Sig ERR3
+DMR slot2 BS DATA DCC=1 Idle ERR6
+DMR slot1 BS DATA DCC=1 CSBK ERR5 Preamble 8001(data cut)]
[LB=1 CSBKO=61 (Preamble) FID=0 v16=8001 id1=(data cut)] id2=(data cut)]]
(data cut)]
101111(data cut)]
+DMR slot2 BS DATA ERR2 DCC=1 Idle ERR12
+DMR slot1 BS DATA ERR1 DCC=1 CSBK ERR10 ECC FAIL
CACH Sig ERR3
+DMR CACH ERR slot2 BS DATA DCC=1 Idle ERR8
+DMR slot1 BS DATA ERR2 DCC=1 CSBK ERR8 ECC FAIL
+DMR CACH ERR slot2 BS DATA DCC=1 Idle ERR13
+DMR slot1 BS DATA ERR3 DCC=1 CSBK ERR6 Preamble 8001 Tgt=(data cut)] Src=(data cut)]
[LB=1 CSBKO=61 (Preamble) FID=0 v16=(data cut)] id1=(data cut)] id2=(data cut)]
(data cut)
110001011001 (etc. etc. data cut)
CACH Sig ERR2
+DMR slot2 BS DATA DCC=1 Idle ERR12