TYT MD-9600 / Retevis RT-90 : Experimental version
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
Thank you very much.
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
Hi Roger, I have a 9600 GPS with these features
Version 2.1 on board
Hardware V 2.09
MCU S006.024
CPS V 1.27
I have everything else I just miss FW Open to try the new adventure. Congratulations to everyone for the excellent work on the GD 77.
Thank you
Lorenzo
Version 2.1 on board
Hardware V 2.09
MCU S006.024
CPS V 1.27
I have everything else I just miss FW Open to try the new adventure. Congratulations to everyone for the excellent work on the GD 77.
Thank you
Lorenzo
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
Currently there seems to be a problem with some radios occasionally transmitting on the wrong timeslot, which seems to occur at the start of transmission to a repeater or duplex hotspot.
The problem is possibly the timing of the first Tx pulse, which can result in the first pulse being transmitted on both TS1 and TS2 under some circumstances.
I am trying to find a solution to this problem, but I'm not 100% sure the wrong TS problem is only caused by only the initial Tx pulse, or whether there may be other problems.
The problem is possibly the timing of the first Tx pulse, which can result in the first pulse being transmitted on both TS1 and TS2 under some circumstances.
I am trying to find a solution to this problem, but I'm not 100% sure the wrong TS problem is only caused by only the initial Tx pulse, or whether there may be other problems.
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
I will email you the file
Be aware there are still problems with this version.
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
Hi Roger,
Its nice to see OpenGD77 continuing.
I have had a MD9600 for quite a while and stopped using it when the AT578 came out.
Its a version 1 MD9600.
I still have the original code plug.
I have the firmware 3.04
CPS 1.18
At this point since I am not using it I would be glad to help test the Alpha firmware for the MD9600. My experience with Open GD77 on my GD77, DM-1801 and RD5R has been great.
Michael/AE7GQ
Its nice to see OpenGD77 continuing.
I have had a MD9600 for quite a while and stopped using it when the AT578 came out.
Its a version 1 MD9600.
I still have the original code plug.
I have the firmware 3.04
CPS 1.18
At this point since I am not using it I would be glad to help test the Alpha firmware for the MD9600. My experience with Open GD77 on my GD77, DM-1801 and RD5R has been great.
Michael/AE7GQ
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
I'll emial you the firmware that runs on V2 hardware.AE7GQ wrote: ↑Thu Jan 20, 2022 11:34 pmHi Roger,
Its nice to see OpenGD77 continuing.
I have had a MD9600 for quite a while and stopped using it when the AT578 came out.
Its a version 1 MD9600.
I still have the original code plug.
I have the firmware 3.04
CPS 1.18
At this point since I am not using it I would be glad to help test the Alpha firmware for the MD9600. My experience with Open GD77 on my GD77, DM-1801 and RD5R has been great.
Michael/AE7GQ
AFIK, the earilest hardware that was ever released to the public is V2.x ,e.g if you look at the silk screen printing on the PCB
So even if your radio reports as "V1" its almost certainly V2.x
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
All testers please see this post
https://www.opengd77.com/viewtopic.php?f=18&t=2052
About a problem with DMR timeout beeps affecting the transmission and subsequent reception.
https://www.opengd77.com/viewtopic.php?f=18&t=2052
About a problem with DMR timeout beeps affecting the transmission and subsequent reception.
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
pedro varela -CT2IGQ,gostava espermentar o firmware para md9600
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
Hello! Need firmware, experimental version.
My radio is MD9600:
CPS Software version V01.27
Hardware version V02.01
MCU Version D016.024
My radio is MD9600:
CPS Software version V01.27
Hardware version V02.01
MCU Version D016.024
Re: TYT MD-9600 / Retevis RT-90 : Experimental version
After opening the radio the pc board says "MD9600-UV-V2.1-170608"
I am relieved to know its HW V2.1. I sent the first 9600 back and they replaced it about a month later.
I have the MD9600 FW from January 23 loaded.
I loaded my open GD77 codeplug on the 9600. Its working.
I tested on Parrot and it sounded good.
There is a Net on the PNWR2 talk group at 6:30 pm PST. That will be a good live test.
Right now I an figuring out the mic buttons and using the ENT key on the front panel to select.
I am able to change power level and squelch with the mic buttons.
Nice job. If you need anything specific tested let me know.
73,
Michael/AE7GQ
I am relieved to know its HW V2.1. I sent the first 9600 back and they replaced it about a month later.
I have the MD9600 FW from January 23 loaded.
I loaded my open GD77 codeplug on the 9600. Its working.
I tested on Parrot and it sounded good.
There is a Net on the PNWR2 talk group at 6:30 pm PST. That will be a good live test.
Right now I an figuring out the mic buttons and using the ENT key on the front panel to select.
I am able to change power level and squelch with the mic buttons.
Nice job. If you need anything specific tested let me know.
73,
Michael/AE7GQ