DCS D036 not available

Post Reply
W5LOS
Posts: 2
Joined: Sat Nov 13, 2021 8:14 pm

DCS D036 not available

Post by W5LOS » Wed Nov 17, 2021 6:47 pm

I have a repeater with D036 and it’s not a option in CPS.
E2021.09.14.01

RD5R
I can manually input the dcs but it doesn’t transmit or receive the code.

Looked to see if there was a change log and didn’t see anything in the newer updates about DCS

User avatar
F1RMB
Posts: 1314
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: DCS D036 not available

Post by F1RMB » Wed Nov 17, 2021 7:16 pm

W5LOS wrote:
Wed Nov 17, 2021 6:47 pm
I have a repeater with D036 and it’s not a option in CPS.
E2021.09.14.01

RD5R
I can manually input the dcs but it doesn’t transmit or receive the code.

Looked to see if there was a change log and didn’t see anything in the newer updates about DCS
DCS 036 is non standard.

The standard has 83 codes:
https://en.wikipedia.org/wiki/Squelch#DCS



Cheers.
---
Daniel
73 de Daniel.

W5LOS
Posts: 2
Joined: Sat Nov 13, 2021 8:14 pm

Re: DCS D036 not available

Post by W5LOS » Wed Nov 17, 2021 7:31 pm

Maybe I’m confused.
Whose standard does openGD77 follow?

Motorola, Yaesu, Icom, Kenwood, Baofeng, TYT, all have 36 and 036 in their DCS. And the RD5R even had it in there as a DCS.
When I lookup Digital Code Squelch those are listed there as well in the group of codes.

User avatar
F1RMB
Posts: 1314
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: DCS D036 not available

Post by F1RMB » Wed Nov 17, 2021 7:34 pm

W5LOS wrote:
Wed Nov 17, 2021 7:31 pm
Maybe I’m confused.
Whose standard does openGD77 follow?

Motorola, Yaesu, Icom, Kenwood, Baofeng, TYT, all have 36 and 036 in their DCS. And the RD5R even had it in there as a DCS.
When I lookup Digital Code Squelch those are listed there as well in the group of codes.
The firmware don't follow any manufacturer standard, just the 83 codes from the real standard (see the Wikipedia link in the post above).
73 de Daniel.

ok1pt
Posts: 121
Joined: Mon Jul 20, 2020 3:38 am

Re: DCS D036 not available

Post by ok1pt » Thu Nov 18, 2021 4:21 am

F1RMB wrote:
Wed Nov 17, 2021 7:34 pm
W5LOS wrote:
Wed Nov 17, 2021 7:31 pm
Maybe I’m confused.
Whose standard does openGD77 follow?

Motorola, Yaesu, Icom, Kenwood, Baofeng, TYT, all have 36 and 036 in their DCS. And the RD5R even had it in there as a DCS.
When I lookup Digital Code Squelch those are listed there as well in the group of codes.
The firmware don't follow any manufacturer standard, just the 83 codes from the real standard (see the Wikipedia link in the post above).
Hi!
There is a reason to limit the codes to 83 values - quoting from the Wikipedia article: " Only 83 of the 512 possible codes are available, to prevent falsing due to alignment collisions.". So, adding more codes probably lowers the reliability and may cause misdetection - i.e. opening on a different code than the desired one.
With regards / 73,
OK1PT

Post Reply