Yes I did and have pi set to OpenGD77
[From May 29th] New ongoing "Development" version has been created
Re: Is there any intention to continue this wonderful project?
Umm. I'll retest
Re: Is there any intention to continue this wonderful project?
In the radio you have to enable it in the Options and set to MMDM
Re: Is there any intention to continue this wonderful project?
Yes I have done that. I will keep trying to figure it out when I get home. It wasn’t working when I left.
Re: Is there any intention to continue this wonderful project?
Thanks to all for your work, have just install the new firmware onto my GD-77.
Looking forward to having a play with it today.
Looking forward to having a play with it today.
Re: Is there any intention to continue this wonderful project?
For anyone who had problems building from the source code.
Colin G4EML let me know that we did not provide instructions to create the blank linker data codec section files
Here are the instructions to create the 2 necessary files
On Windows the files can be created using these commands
fsutil file createnew codec_bin_section_1.bin 16384
fsutil file createnew codec_bin_section_2.bin 163984
On Linux use
dd if=/dev/zero of=codec_bin_section_1.bin bs=16384 count=1
dd if=/dev/zero of=codec_bin_section_2.bin bs=163984 count=1
Colin G4EML let me know that we did not provide instructions to create the blank linker data codec section files
Here are the instructions to create the 2 necessary files
On Windows the files can be created using these commands
fsutil file createnew codec_bin_section_1.bin 16384
fsutil file createnew codec_bin_section_2.bin 163984
On Linux use
dd if=/dev/zero of=codec_bin_section_1.bin bs=16384 count=1
dd if=/dev/zero of=codec_bin_section_2.bin bs=163984 count=1
Re: Is there any intention to continue this wonderful project?
Hi,
or execute "codec_cleaner -C" from the firmware/tools directory, on both platform
Cheers.
---
Daniel
or execute "codec_cleaner -C" from the firmware/tools directory, on both platform
Cheers.
---
Daniel
Re: Is there any intention to continue this wonderful project?
I know it was 2 months of herculean work but it was short by commercial standards. If you worked for a big company, your company would have you guys still in a meeting with menu screens on the white board and some Black Belt guy would be complaining about compliance with Six Sigma processes.
Re: Is there any intention to continue this wonderful project?
Very well done Roger and Company, now to find my programming lead...
Re: Is there any intention to continue this wonderful project?
Thanks Roger, Daniel and the rest of the team. I've installed the latest firmware to three GD-77's without a problem. Seems to be working fine in DMR and analog. I really appreciate the effort you guys put in.
Wayne
WA2N
Wayne
WA2N