OpenGD77

I have an old WRT350N V.1 with Broadcom BCM4705 @ 300 MHz chipset, 32 MB RAM and 8 MB flash. I know it only has 8mb flash but ddwrt or open wrt has a version for this router. Is it possible to have a light version for old routers?

it can work 8 MB flash version,only install need software,need openwrt sdk to make menuconfig select WRT350N board and select usb driver, host software ,then make image for it.

is it possible to run on https://www.pcengines.ch/alix2f13.htm
I have 2 boards here.

https://github.com/lazywalker/openwrt

OSTAR is open source now.

OSTAR MMDVM Suit test on MT7688 wifi Module and youku yk1 MT7620 router running DMR/P25/YSF/DSTAR/NXDN/Pocsage Service
the same as pistar but simplify rom is only 8M build in travelmate module support add muiti wifi SSID and auto connect
any openwrt router have>= 16M ROM and have USB port MT76x8 have 3 uart so don't need usb ,buy MT7620 need USB to connect USB MMDVM Hotspot
i make a raspberry pi zero or zero w image for test the image is only 18Mb
to use openGD77 usb serial select kernel module-usb kmod-usb-atm/acm kmod-usb-serial kmod-usb2

http://www.taozhengbo.com/ostar-19.07.3 ... pgrade.bin use ttyS1 and cp210x ch34x ftdi atm usb serial
http://www.taozhengbo.com/openwrt-brcm2 ... actory.zip for rpi zero w and zero running AP mode and support rpi zero + usb wifi +usb 4G LTE module

bg7iynpost_id=6533 wrote:

Tue Mar 10, 2020 3:41 pm

我的路由器是优酷YK-L1，32m闪存128 m ram，mt 7620，旧的但便宜。N

Hello, my Youku yk-l1 will not set DMR P25 Setting Here after brushing openwrt. Could you tell me more? Thank you for your help, thank you.

Hi!
Which router is better suited for installing MMDWMHOST?
GL.iNet GL-AR300M16 with a processor QCA9531
GL.iNet MT300N-v2 with a processor MTK7628N

IW6CNM wrote: ↑

Tue Mar 10, 2020 11:52 am

Hello
do you think is possible to use the router GL.iNet GL-MT300N-V2 ?
Openwrt is already installed and it cost less than 23 € now
best regards
davide

Hello. Was it possible to flash this router? When I try to flash, I get a message about an incorrect file format. It was forcibly passed, but it does not work. Returned the factory firmware.

你好，我请教一个问题，你有一个星际宝盒，刷的是OPENWRT，能不能出一个在OPENWRT上安装OPENGD77 Hotspot的视频教程，谢谢老师。