Request a copy of RD-5R firmware for hotspot support
Request a copy of RD-5R firmware for hotspot support
I really want this firmware, I want to use it to turn on hot spots, but unfortunately, I can't find any friends anywhere. If you have one, send me a very thank you.
Re: Request a copy of RD-5R firmware for hotspot support
It's available in the following forum section:
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.
Re: Request a copy of RD-5R firmware for hotspot support
Hotspot could be enabled in the RD5R code, but the USB connection would randomly disconnect when you tried to use the radio in hotspot mode
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
Re: Request a copy of RD-5R firmware for hotspot support
VK3KYY wrote: ↑Tue Feb 20, 2024 8:19 pmHotspot could be enabled in the RD5R code, but the USB connection would randomly disconnect when you tried to use the radio in hotspot mode
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
Is there any compiled firmware I won't modify the code Thank you for that
Re: Request a copy of RD-5R firmware for hotspot support
What software or application is needed to edit the source code so that it can output the firmware and load it onto the radio I don't change the code, but it's worth itVK3KYY wrote: ↑Tue Feb 20, 2024 8:19 pmHotspot could be enabled in the RD5R code, but the USB connection would randomly disconnect when you tried to use the radio in hotspot mode
You would need to modify the internal electronics to add better RF suppression onto the USB and other internal connections, otherwise it will constantly have problems with the USB disconnecting when the radio transmits
Buy a hotspot or another radio
Re: Request a copy of RD-5R firmware for hotspot support
Thank you, good wishes to youF1RMB wrote: ↑Tue Feb 20, 2024 7:29 pmIt's available in the following forum section:
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.
Re: Request a copy of RD-5R firmware for hotspot support
I guess I'll just buy a hot circuit. Thank you.F1RMB wrote: ↑Tue Feb 20, 2024 7:29 pmIt's available in the following forum section:
viewtopic.php?f=13&t=3636
Beware, hotspot (modem) mode is not supported on the RD-5R, because of hardware limitation.
Re: Request a copy of RD-5R firmware for hotspot support
Code is compiled using MCUExpresso which is the official development IDE for the MK22 in the RD-5R