Page 2 of 4

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 10:01 am
by m1dyp
DO4CZ wrote:
Thu Dec 12, 2019 9:35 am


@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip
thanks o will try that

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 10:11 am
by SQ7PTE
Works great.
Thank you very much.

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 10:54 am
by DU2XXR
My bad. I plugged in the radio to the swr meter but the actual antenna cable was unplugged (I usually remove it as a lightning precaution).

As per my last check I was able to reach around 3Km at 3w with rolling terrain.

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 11:02 am
by VK3KYY
4I1RAC wrote:
Thu Dec 12, 2019 10:54 am
My bad. I plugged in the radio to the swr meter but the actual antenna cable was unplugged (I usually remove it as a lightning precaution).

As per my last check I was able to reach around 3Km at 3w with rolling terrain.

(LOL)

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 11:28 am
by m1dyp
oops. yeah antenna helps lol. :mrgreen:

wish it was that simple with my com port.

never mind, at least I still have android and raspberry :D

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 11:53 am
by m1dyp
OMG

I found this on another forum (isnt google wonderful)

"response from David PA7LIM which was to "Please select an YSF reflector in the setup."

when I looked in settings, mine was blank, so I randomly chose one, saved it and hey presto.....

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 12:36 pm
by DO4CZ
To adjust a YSF Reflector should not have a single foot in DMR.

YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.

Or did you activate Fusion?
With GD-77 we only need to switch on serial and DMR

I didn't do it, just set up and finished DMR.
Worked right away.

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 12:51 pm
by m1dyp
DO4CZ wrote:
Thu Dec 12, 2019 12:36 pm
To adjust a YSF Reflector should not have a single foot in DMR.

YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.

I didn't do it, just set up and finished DMR.
Worked right away.
yes it is strange I agree, but as soon as I did it the error message went and it worked

I cannot explain why, I can only report what happens :D

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 1:00 pm
by DO4CZ
Yes, ok, it was not like this ... ;)

Re: OpenGD77 with BlueDV for Windows

Posted: Thu Dec 12, 2019 1:40 pm
by m1dyp
m1dyp wrote:
Thu Dec 12, 2019 10:01 am
DO4CZ wrote:
Thu Dec 12, 2019 9:35 am


@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip

that version works straight away :mrgreen: