Page 1 of 1
Reduce RT3S TX power in Hotspot mode running BlueDV?
Posted: Wed May 10, 2023 9:33 pm
by G0UJA
Running RT3S in Hotspot mode with BlueDV and everything works great but...
Is there a way to reduce the TX power of the RT3S from 1W to 50mW?
I'm not sure if this is possible and certainly can't find any information in searches.
I have tried setting the radio to 50mW before enabling Hotspot mode and also moving the slider in BlueDV but nothing seems to have any effect.
James G0UJA
Re: Reduce RT3S TX power in Hotspot mode running BlueDV?
Posted: Wed May 10, 2023 11:54 pm
by VK3KYY
G0UJA wrote: ↑Wed May 10, 2023 9:33 pm
Running RT3S in Hotspot mode with BlueDV and everything works great but...
Is there a way to reduce the TX power of the RT3S from 1W to 50mW?
I'm not sure if this is possible and certainly can't find any information in searches.
I have tried setting the radio to 50mW before enabling Hotspot mode and also moving the slider in BlueDV but nothing seems to have any effect.
James G0UJA
Power in Hotspot mode is controlled by the host application. In your case BlueDV.
Look in the BlueDV documentation, or contact the BlueDV developer
Re: Reduce RT3S TX power in Hotspot mode running BlueDV?
Posted: Thu May 11, 2023 12:55 am
by F1RMB
Hi,
Since BlueDV doesn't set the power, you have to set the power on the transceiver itself before starting the hotspot.
Cheers.
---
Daniel
Re: Reduce RT3S TX power in Hotspot mode running BlueDV?
Posted: Thu May 11, 2023 7:56 am
by G0UJA
Thank you for the reply Daniel.
I had tried this many times before but I was setting the power in the memory channel rather than the VFO!
Your reply made me look at the settings again and it is now set how I want.
Many thanks.
James G0UJA
Ynt: BlueDV çalıştıran Hotspot modunda RT3S TX gücünü azaltın mı?
Posted: Sun Apr 21, 2024 10:52 am
by TA8PRO
First of all, I learned how to adjust the TX power from this page, thank you very much. My question is, is there a place where we can choose Color Code and Time Slot? VFO mode does not work.
Re: Ynt: BlueDV çalıştıran Hotspot modunda RT3S TX gücünü azaltın mı?
Posted: Sun Apr 21, 2024 10:58 am
by F1RMB
TA8PRO wrote: ↑Sun Apr 21, 2024 10:52 am
First of all, I learned how to adjust the TX power from this page, thank you very much. My question is, is there a place where we can choose Color Code and Time Slot? VFO mode does not work.
If you're asking for BlueDV, it seems it always use CC 1. About the TS, as it's simplex, it's always TS2.
If it's about the FW config, I suggest you to read the user manual (VFO permits the same config as Channel):
https://github.com/LibreDMR/OpenGD77_Us ... r_Guide.md