Page 1 of 1

TYT MD-9600 Hotspot Mode

Posted: Fri Jul 29, 2022 5:50 pm
by TA8PRO
I want to buy tyt md-9600 and upload opengd77 but I dont know this product can hotspot mode? Thanks 73.

Re: TYT MD-9600 Hotspot Mode

Posted: Fri Jul 29, 2022 9:52 pm
by VK3KYY
TA8PRO wrote:
Fri Jul 29, 2022 5:50 pm
I want to buy tyt md-9600 and upload opengd77 but I dont know this product can hotspot mode? Thanks 73.
Yes

Re: TYT MD-9600 Hotspot Mode

Posted: Wed Aug 03, 2022 8:10 pm
by SA0BUX
I have started to test the hotspot mode on my MD-9600 and it seems to work but maybe a bit unstable, I can run for several hours with
activity on TG91 and other TG's but eventually the daemon die due to lost modem.
It could be due to that I run on Windows 10 with a mmdvmhost.exe that I have compiled myself with MS Visual studio so later on I will
try the radio via a raspberry pi 3+ and pi-star to see if that makes any difference.

M: 2022-08-03 12:56:06.861 DMR Slot 2, received network voice header from SM0OTY to TG 2400
M: 2022-08-03 12:56:07.445 DMR Talker Alias (Data Format 2, Received 6/16 char): 'SM0OTY'
M: 2022-08-03 12:56:07.445 DMR Slot 2, Embedded Talker Alias Header
M: 2022-08-03 12:56:07.446 0000: 04 00 A0 53 4D 30 4F 54 59 *...SM0OTY*
M: 2022-08-03 12:56:08.172 DMR Talker Alias (Data Format 2, Received 13/16 char): 'SM0OTY Nils-o'
M: 2022-08-03 12:56:08.172 DMR Slot 2, Embedded Talker Alias Block 1
M: 2022-08-03 12:56:08.175 0000: 05 00 20 4E 69 6C 73 2D 6F *.. Nils-o*
M: 2022-08-03 12:56:08.403 DMR Slot 2, received network end of voice transmission from SM0OTY to TG 2400, 1.7 seconds, 0% packet loss, BER: 0.0%
E: 2022-08-03 13:16:24.916 No reply from the modem for some time, resetting it
M: 2022-08-03 13:16:24.916 Closing the MMDVM
M: 2022-08-03 13:16:26.921 Opening the MMDVM
E: 2022-08-03 13:16:40.774 Unable to read the firmware version after six attempts
M: 2022-08-03 13:16:45.782 Opening the MMDVM

Re: TYT MD-9600 Hotspot Mode

Posted: Wed Aug 03, 2022 9:22 pm
by VK3KYY
This sort of problem happens on the GD77 if RF enters the USB cable. Do you have chokes on the cable

Re: TYT MD-9600 Hotspot Mode

Posted: Thu Aug 04, 2022 6:31 am
by SA0BUX
VK3KYY wrote:
Wed Aug 03, 2022 9:22 pm
This sort of problem happens on the GD77 if RF enters the USB cable. Do you have chokes on the cable
Nope but I'll try that , I can run it some time on a dummy load too.
But it seems that the problem appeared some time after the last transmit, I had it connected to TG91 for several hours earlier without
problems, seems more to be related to long idle. Could be some power save in my Intel NUC that affects the USB.

Re: TYT MD-9600 Hotspot Mode

Posted: Thu Aug 04, 2022 6:34 am
by VK3KYY
SA0BUX wrote:
Thu Aug 04, 2022 6:31 am
VK3KYY wrote:
Wed Aug 03, 2022 9:22 pm
This sort of problem happens on the GD77 if RF enters the USB cable. Do you have chokes on the cable
Nope but I'll try that , I can run it some time on a dummy load too.
But it seems that the problem appeared some time after the last transmit, I had it connected to TG91 for several hours earlier without
problems, seems more to be related to long idle. Could be some power save in my Intel NUC that affects the USB.
OK

AFIK many people use it for hotspot mode and no one else reported any problems.

I agree. Look in the driver manager for the USB port to confirm that power saving is not enabled.

I had power saving problems with the wifi on some of my PC's and had to disable power saving in the driver

Re: TYT MD-9600 Hotspot Mode

Posted: Tue Nov 15, 2022 2:36 pm
by sm3gdt
Hi all,
I am running a older MD9600 as Hotspot with Raspberry Pi and use the same hardware driver as before openGD77.
It is working very well running with power 1 Watt I can run my hotspot far from home. You can also use the BlueDV
software on a PC. Thank you VK3KYY for this fine solution!