OpenGD77

OPENGD77 Hotspot BlueTV "status logged out"!
please help me!Thanks...

Did you enable hotspot mode in the firmware and set it to BlueDV compatable

Hi,

IIRC, Brandmeister requires a password defined in your selfcare account, old "passw0rd" is not supported anymore.
Also, it seems you haven't define a connection at startup.

Cheers
---
Daniel

I've already chosen hotspot for bluedv mode on the radio.

“IIRC, Brandmeister requires a password defined in your selfcare account, old "passw0rd" is not supported anymore.
Also, it seems you haven't define a connection at startup.”

1、Thank you,By the teacher's prompts,Brandmeister password is OK,
2、"a connection at startup",I didn't set it up about this step。
Ask the teacher to guide me and teach me how to set up, thank you very much.

Now is “status logged in to DMR”，but still can't receive…
please…

bg3iay wrote: ↑

Fri Jun 03, 2022 2:42 am

Now is “status logged in to DMR”，but still can't receive…
please…

It is quite difficult to help you here because several reasons can cause this (like your local network, router, firewalls, etc).

Also, are you sure that there are activity to the Talkgroup you're connected to, are you really logged to the Master (I'm not sure BlueDV can provide logs).

Better off trying with MMDVMHost, at least it logs everything (there are some Windows builds on the forum). Of course, you have to edit the configuration file by hand, there is no GUI at all.


Cheers.
---
Daniel

The one thing I have found as a 'workaround' at the moment with bluedv and brandmeister is to login to your hotspot on brandmeister and you can set a few 'static' talkgroups. This has been helpful with me being able to receive without having to 'key-up' . Personally, I found that the 'DMR simple mode' kind of does the same thing as the static talkgroup (one at a time), but sends occasional 'reconnect' key-ups. Your mileage may vary...

I hope you find this helpful...

Try use my the parrot feature of BM, on PC 9990