Promiscuous Mode and a DVMEGA Hotspot
Posted: Thu Aug 18, 2022 10:57 pm
Greetings,
Picked up my GD77 after over a year time gap.
Saw there was new firmware and updated to Feb28 2022. So far so good.
Reloaded the last code plug file i had ...... still good.
Updated pi-star and the pi board ... good
Started messing around with P-mode, made my static TG's on BM that I normally use.
Read the nedw manual, thought I'd try P-mode,
Orange Button, turn all filters to OFF (DMR & TS)
And I discovered that BM Hoseline is working again - great ..... But wait ......
I set the channels in Hoseline to what i have in my static set, now I can hear activity on Hoseline(HL), but usually NOT on the hotspot to the radio.
I've tried everything I could find to try, so this post is kind of my last resort. At first I thought i have a problem with the radio, but now I think its the hotspot or both. Pmode should allow all traffic thru to my hotspot, but im filtering thru my static TG list on BM
I dont always hear audio from the HS to the radio, but sometimes it does come thru. I get the traffic being first come first serve thing, but I can see audio on HL TGS but not getting thru. Is it possible that that Hoseline is not showing competing traffic keeping it from making to my HP ?
Or setting on either radio or HS not configured ?
I think Im missing something basic, like i said sometimes it work and sometimes it doesnt. I do remove very busy TGs like 91 and 31656. but still dont see others come thru.
ANY ideas or suggestion would be much appreciated
Rich
n2ry
Picked up my GD77 after over a year time gap.
Saw there was new firmware and updated to Feb28 2022. So far so good.
Reloaded the last code plug file i had ...... still good.
Updated pi-star and the pi board ... good
Started messing around with P-mode, made my static TG's on BM that I normally use.
Read the nedw manual, thought I'd try P-mode,
Orange Button, turn all filters to OFF (DMR & TS)
And I discovered that BM Hoseline is working again - great ..... But wait ......
I set the channels in Hoseline to what i have in my static set, now I can hear activity on Hoseline(HL), but usually NOT on the hotspot to the radio.
I've tried everything I could find to try, so this post is kind of my last resort. At first I thought i have a problem with the radio, but now I think its the hotspot or both. Pmode should allow all traffic thru to my hotspot, but im filtering thru my static TG list on BM
I dont always hear audio from the HS to the radio, but sometimes it does come thru. I get the traffic being first come first serve thing, but I can see audio on HL TGS but not getting thru. Is it possible that that Hoseline is not showing competing traffic keeping it from making to my HP ?
Or setting on either radio or HS not configured ?
I think Im missing something basic, like i said sometimes it work and sometimes it doesnt. I do remove very busy TGs like 91 and 31656. but still dont see others come thru.
ANY ideas or suggestion would be much appreciated
Rich
n2ry