GD77 PROGRAMMING ISSUE

Post Reply
OE1MWW
Posts: 106
Joined: Sat Oct 17, 2020 2:20 pm
Location: JN88EG
Contact:

Re: GD77 PROGRAMMING ISSUE

Post by OE1MWW » Fri Jul 29, 2022 10:56 am

your question has been answered and discussed in detail in the FaceBook group - why double post ?

you have to use a GD77 cable - and no other. no electronics in it, straight wires.
if you switch the GD77 on, the cable attached to the GD77 and the computer,
the CPS should see it.

You ask 'any ideas please' Oh yes, if you use Google, you will find several pictures how a GD77 cable is wired.
You should be able to check this with any simple meter. 'Old' or 'new' firmware on the GD77 is not relevant to connect.

Seems that you still trying and lurking around, to listen to other commercial transmission
in your vicinity. OpenGD77 is built for Ham Radio ;-)

73's de OE1MWW
Wolfgang

Image

DO3HB
Posts: 14
Joined: Tue May 25, 2021 4:38 pm

Re: GD77 PROGRAMMING ISSUE

Post by DO3HB » Fri Jul 29, 2022 11:03 am

gavalar wrote:
Fri Jul 29, 2022 9:29 am
hi all i have just got a gd77 its already got opengd77 installed i have tried to link the radio with the opengd77 cps and it doesnt register could it be because the firmware on the radio is 2 years old just to add im using a cable off the tytmd380 i bought it off radiodiddty and they assured me its the same cable does anyone have any ideas please
First you should check if the driver is installed correctly. The procedure is described here: " https://github.com/LibreDMR/OpenGD77_Us ... stallation "

Post Reply