Battery eliminator

OK2SHI
Posts: 6
Joined: Tue Dec 01, 2020 1:36 pm

Battery eliminator

Post by OK2SHI » Wed Mar 10, 2021 8:28 pm

Hi, where to buy battery eliminator for md-760/gd-77?.
Thanks.
Ivo,ok2shi

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Battery eliminator

Post by VK3KYY » Wed Mar 10, 2021 10:07 pm

OK2SHI wrote:
Wed Mar 10, 2021 8:28 pm
Hi, where to buy battery eliminator for md-760/gd-77?.
Thanks.
Ivo,ok2shi
They are difficult to find.

I found a local company in Australia who had a few in stock, so I bought 2 of them

https://qslcomms.com.au/shop/ols/produc ... eliminator

However, they don't export them.

I checked eBay, Amazon, AliExpress, Bangood etc and none are available

OE1MWW
Posts: 106
Joined: Sat Oct 17, 2020 2:20 pm
Location: JN88EG
Contact:

Re: Battery eliminator

Post by OE1MWW » Tue Dec 28, 2021 11:25 am

it looks like, the TYT MD-380 battery eliminator will fit on GD77 ???

https://www.aliexpress.com/item/32830220282.html

Anyone tried this ?

73's de OE1MWW
Wolfgang

kt4lh
Posts: 272
Joined: Sun Jan 12, 2020 4:27 am

Re: Battery eliminator

Post by kt4lh » Tue Dec 28, 2021 2:28 pm

OE1MWW wrote:
Tue Dec 28, 2021 11:25 am
it looks like, the TYT MD-380 battery eliminator will fit on GD77 ???

https://www.aliexpress.com/item/32830220282.html

Anyone tried this ?
What makes you think that? You can't put MD-380 batteries on the GD77, no.

OE1MWW
Posts: 106
Joined: Sat Oct 17, 2020 2:20 pm
Location: JN88EG
Contact:

Re: Battery eliminator

Post by OE1MWW » Thu Dec 30, 2021 8:40 am

Hi Walter, KT4LH,

You are right, a MD-380 battery does not hold = work on a GD77!

But some user reported they are using the MD-380 battery eliminator on a GD77
It perfectly slides in, just the bottom plate with the two slots is missing. Not perfect.
So they use a cable tie around the GD77 at the bottom end to hold it - just good enough for a fixed operation on a hot spot.

To my surprise, after extensive Google search, I found a shop in Europe, selling 'real' GD77 battery eliminator.
They have several of them on stock. My link in the FaceBook group was deleted because 'promotion' is not allowed.
"SNR on FaceBook is very low" (Joe Taylor K1JT). A lot of noise and only a few 'real' signals in FaceBook ;-)

Not sure if such a link to a shop is allowed in this forum.

73's de OE1MWW
Wolfgang

kt4lh
Posts: 272
Joined: Sun Jan 12, 2020 4:27 am

Re: Battery eliminator

Post by kt4lh » Thu Dec 30, 2021 2:36 pm

OE1MWW wrote:
Thu Dec 30, 2021 8:40 am
Hi Walter, KT4LH,

You are right, a MD-380 battery does not hold = work on a GD77!

But some user reported they are using the MD-380 battery eliminator on a GD77
It perfectly slides in, just the bottom plate with the two slots is missing. Not perfect.
So they use a cable tie around the GD77 at the bottom end to hold it - just good enough for a fixed operation on a hot spot.
Huh, that's very interesting.. Cable tie around is kind of ick but if you're using it for a (semi) permanent hotspot or such it would be perfectly fine. I sold my MD380 or I'd give it a try here. :) I thought I had looked at them and everything looked a bit different but maybe I just looked at the tabs interfacing with the radio and decided it wasn't going to work.

I wish I could luck upon a GD77 super cheap to use as a hotspot, can't stand the thought of "wasting" mine on the duty, even though my existing hotspot is pretty terrible and I think actually worse than when I bought it, it's nearly completely deaf. I used to be able to use it for quarter mile/500m and now I can't even use it in the back yard. I hear it fine, it doesn't hear me.

OH6TX
Posts: 12
Joined: Wed Nov 18, 2020 9:46 pm

Re: Battery eliminator

Post by OH6TX » Tue Jan 04, 2022 2:05 pm

Hi

You can also print it? if 3d printer is availlable?

https://www.thingiverse.com/thing:2742838

Jari

OE1MWW
Posts: 106
Joined: Sat Oct 17, 2020 2:20 pm
Location: JN88EG
Contact:

Re: Battery eliminator

Post by OE1MWW » Tue Jan 04, 2022 5:10 pm

I am not sure, if this thingverse is perfect. On some pictures the top 'flap' is missing
and the side rail / border is not straight as shown on their pics.
It needs raised for 2cm on the bottom.

Image


But there is a source in the Czech Republic:

https://www.eshop-yachtmeni.cz/tyt-md-7 ... nator-12v/

Click on the top right corner on 'CZK Čeština' to find in the pulldown menu English. If required, use
Google Chrome to translate.

The MD-760 is the same housing as the GD77. My order was sent immediately via DPD

73's de OE1MWW
Wolfgang
OH6TX wrote:
Tue Jan 04, 2022 2:05 pm
Hi

You can also print it? if 3d printer is availlable?

https://www.thingiverse.com/thing:2742838

Jari

OH6TX
Posts: 12
Joined: Wed Nov 18, 2020 9:46 pm

Re: Battery eliminator

Post by OH6TX » Tue Jan 04, 2022 6:00 pm

True Wolfgang

There is that cosmetic part missing, but parts fit good to DM1801 and also GD77. if this is problem it can be altered with moderate skills.

Personally i print that batteryeliminator integrated to dashboard attachments and power splitter.

Jari

mouseman73
Posts: 17
Joined: Thu May 14, 2020 10:46 pm

Re: Battery eliminator

Post by mouseman73 » Tue Jan 04, 2022 6:49 pm

Here is what you want Ivo from OK country :-)

https://www.eshop-yachtmeni.cz/tyt-md-7 ... nator-12v/

(mají to i jiní prodejci)

Post Reply