[HOWTO] Flash the OpenGD77 firmware (new procedure)

Post Reply
User avatar
F1RMB
Posts: 2488
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

[HOWTO] Flash the OpenGD77 firmware (new procedure)

Post by F1RMB » Thu Jul 22, 2021 7:38 pm

This procedure is valid for all the supported transceivers, regardless of the brand and model.

You must use this installation procedure

  1. Install the latest CPS, available here
  2. Check installation instruction here
    you also have a dedicated button in the CPS's Firmware Loader window
    flash_instructions.png
    flash_instructions.png (15.27 KiB) Viewed 40768 times
  3. As described in the installation instructions, download to your computer the Radioditty official firmware (GD-77 Firmware V4.3.6 [Ham Version]).
  4. Unzip the downloaded zip archive, then copy, somewhere on your hardrive (e.g. "My Documents"), the file GD-77_V4.3.6.sgl, located in "Firmware software V4.3.6\" sub-directory.
    • This file has to remain in that location, as it will be re-used the next time you will flash another OpenGD77 firmware file.
  5. Start the CPS
  6. In "Extras" menu, click on "Firmware loader" entry.
  7. Click the "Select Firmware v4.3.6" button.
    01-select_official_FW_button.png
    01-select_official_FW_button.png (14.95 KiB) Viewed 40768 times
  8. A file selection window will pop-up. Go to the location where you saved the GD-77_V4.3.6.sgl file, select it, click the "Open" button.
    02-select_official_FW_file.png
    02-select_official_FW_file.png (57.06 KiB) Viewed 40768 times
  9. The software will check the SGL file validity, a "[+DMR]" text is now displayed in the Firmware Loader window title.
    03-official_FW_validated.png
    03-official_FW_validated.png (18.12 KiB) Viewed 40768 times
  10. Turn on your transceiver in bootloader mode (SK1 + SK2 + power on).
    • The Green led lit up, the screen remains off (or black).
  11. Select the correct radio model.
  12. Now click on the "Select a File & Update" button,
    04-Select_a_bin_file.png
    04-Select_a_bin_file.png (14.78 KiB) Viewed 40768 times
  13. A file selection window will pop-up, go and select the OpenGD77 firmware you want to flash (a .bin file).
  14. The flashing procedure will start right after the OpenGD77 firmware file is selected.


Note: The next time you need to flash an OpenGD77 firmware, directly jump to 10.

Post Reply