OpenGD77

A new Alpha 2.2 version is available for the TYT MD2017 / Retevis RT-82

downloads/MD2017/Firmware/5a723711fcbd4 ... da26a47000

This version incorporates the same bug fixes and enhancements as the OpenGD77 firmware for the other supported radios.

It does not add any new MD-2017 related functionality




* Fixes inconsistencies in UI when change power levels by holding P1/P2 (MD-2017 Specific bug)
* Fixes problems of the VFO and Channel screen sometimes being blank
* Fixes problems with AT1846S TRx chip register cache system
* Fixes problem when attempting to transmit DTMF in satellite mode.
* Fixes QuickKey problems e.g. in VFO Dual Watch
* Updated multiple translations
* Romanian added. Note: The latest CPS is required to be able to select Romanian
* Adds Force DMO open to DMR channels. This sets a channel to operate in simplex / DMO even when the Tx and Rx frequencies are different. The CPS has also been updated to support this option.

Thanks to Daniel F1RMB for his work on this new version, and thanks again to the translators

Gracias por la nueva actualización.
73.

Is the frequency correct for both FM and FMN now?

SA0BUX wrote: ↑

Tue Mar 19, 2024 10:41 am

Is the frequency correct for both FM and FMN now?

Yes, but we had to use a hack to fix this, but I don't link the hack so we are still investigating a better fix

The screen isn't blanking for me. Is this an issue for anyone else?

Dale, KC2CBD

KC2CBD wrote: ↑

Thu Mar 21, 2024 9:15 am

The screen isn't blanking for me. Is this an issue for anyone else?

Dale, KC2CBD

Blanking ?

KC2CBD wrote: ↑

Thu Mar 21, 2024 9:15 am

The screen isn't blanking for me. Is this an issue for anyone else?

Dale, KC2CBD

I guess you're talking about backlight:

Display Options -> Timeout

Yes and the backlight isn't blanking even with a time set.

I just tried and it works as expected.
Can you give me your backlight settings ?
- Brightness
- Nite bright
- Mode
- Timeout

F1RMB wrote: ↑

Thu Mar 21, 2024 1:27 pm

I just tried and it works as expected.
Can you give me your backlight settings ?
- Brightness
- Nite bright
- Mode
- Timeout

Brightness - 30%
Nite Bright - 20%
Mode - Auto
Timeout - 10s