Codeplug

Post Reply
EA7KFF
Posts: 10
Joined: Wed Nov 20, 2019 9:18 am

Codeplug

Post by EA7KFF » Tue Mar 07, 2023 1:53 pm

Hello, good morning, can you tell me how to change the original codeplug from 1701 to that of gd77, thank you very much

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Codeplug

Post by VK3KYY » Tue Mar 07, 2023 8:48 pm

EA7KFF wrote:
Tue Mar 07, 2023 1:53 pm
Hello, good morning, can you tell me how to change the original codeplug from 1701 to that of gd77, thank you very much

DM-1701 support is still in Alpha stage of development .

AFIK there is no tool to convert the codeolug

You should export the channels from the official 1701 CPS to CSV, and then rearrange the columns to suit the OpenGD7CPS channel import

It is also likely you have multiple duplicate channels with the same frequency but different TG.

The OpenGD77 firmware allows TG list to be assigned to a Channel so that this duplication is not required
Hence you will need to remove channels with duplicate frequencies and also you do not need a zone per repeater

Export the channels from the default / minimal codeplug from the OpenGD77CPS to see the columns and then paste you new data into that CSV
Then import it

EA7KFF
Posts: 10
Joined: Wed Nov 20, 2019 9:18 am

Re: Codeplug

Post by EA7KFF » Tue Mar 07, 2023 9:30 pm

Thank you so much,a cordial greeting.

Post Reply