VK3KYY wrote: ↑Sat Mar 04, 2023 10:30 am
Hopefully when you try the latest firmware I posted, the CPS will recognise as UV380 type
Programming would not work correctly as GD77 type, because the UV380 and DM-1701 etc do not have EEPROM, and the CPS has to send commands differently to write all data to Flash memory, even though the address in memory is the same on both radios.
Yes, after flashed the latest firmware, the codeplug read & write worked correctly!
VK3KYY wrote: ↑Sat Mar 04, 2023 10:30 am
Re: Battery voltage
Change the
Options -> Display Options -> Battery to show voltage
Then tell me the actual voltage of the battery and the voltage which is displayed by the firmware.
Two photoes for your information.
About the arrow keys & knob behaviour, I tested on last firmware build very carefully and listed the current situation below:
1. In both VFO & Zone Channel List Mode:
-->General:
------>SK3+UP: Power +
------>SK3+DOWN: Power -
------>LEFT(P1): n/a[beep]
------>RIGHT(P2): n/a[beep]
------>SK3+LEFT(P1): n/a
[No beep]
------>SK3+RIGHT(P2): n/a[beep]
-->Analog Channel:
------>UP: Squelch +
------>DOWN: Squelch -
-->Digital Channel:
------>UP: RG member previous
------>DOWN: RG member next
-->In VFO:
------>KNOB:Freq step up/Freq step down
-->In Zone Channel List:
------>KNOB:ch +/ ch -
2. In Menu:
-->General:
------>UP/SK3+UP: Menu Item +
------>DOWN/SK3+DOWN: Menu Item -
------>KNOB:Menu option(value) +/Menu option(value) -
------>LEFT(P1): Menu option(value) -
------>RIGHT(P2): Menu option(value) +
------>SK3+LEFT(P1): n/a
[No beep]
------>SK3+RIGHT(P2): Menu option(value) +
This is ok for me now, this radio is already a very sharp knife now!
but if you have time some day or when you receive your MD-1701 radio, I personally suggest the MD-760 style navigation maybe more comfortable and easily to handle, which the detail differences compare to upon are:
1.In both VFO & Zone Channel List Mode:
-->General:
------>SK3+LEFT(P1): Power -
------>SK3+RIGHT(P2): Power +
-->Analog Channel:
------>LEFT(P1): Squelch -
------>RIGHT(P2): Squelch +
-->Digital Channel:
------>LEFT(P1): RG member previous
------>RIGHT(P2): RG member next
-->In VFO:
------>UP&DOWN/KNOB:Freq step up/Freq step down
-->In Zone Channel List:
------>UP&DOWN/KNOB:ch +/ ch -