Latest Release of Firmware/CPS for TYT MD-UV390

[Dl1hgb]

Thank you very much for all the information!!

@SA0BUX: from your config screenshot I read that the "In Call GPS" must be enabled. What do I need to configure within the codeplug? Just the TX TA APRS on a normal channel definition?

[SA0BUX]

Thank you very much for all the information!!

@SA0BUX: from your config screenshot I read that the "In Call GPS" must be enabled. What do I need to configure within the codeplug? Just the TX TA APRS on a normal channel definition?

Yes , enable it on DMR channels where you want to send positions, when you transmit on such channels the radio will send positions inside the TA data.

And you need either a GPS fix or a position defined in "Radio info" Menu Item.

[Dl1hgb]

OK, I defined a position in "Radio Info", and this works fine. Now I want to use a GPS fix. But I'm not able to enable the GPS. When I select the GPS menu item a screen with the value "OFF" is displayed, rotating the middle knob does not change the "OFF" value. Is there a trick or secret to activate the GPS feature?

[F1RMB]

OK, I defined a position in "Radio Info", and this works fine. Now I want to use a GPS fix. But I'm not able to enable the GPS. When I select the GPS menu item a screen with the value "OFF" is displayed, rotating the middle knob does not change the "OFF" value. Is there a trick or secret to activate the GPS feature?

It's documented: https://github.com/LibreDMR/OpenGD77_Us ... gps-screen

[Dl1hgb]

Thank you very much, that helped. It's working now.
vy 73