I have a TYT md-uv390 plus.
I have programmed in my DMR stuff and it is working great on my hotspot.
However when I program in Analog repeaters I can hear them fine. However when I transmit the screen goes
black and it does not transmit as best as I can tell. Can anyone help me with what I have done wrong?
Analog transmit going black
Re: Analog transmit going black
Please will anyone who has the UV380/390 PLUS version, whether it works correctly or not with the OpenGD77 firmware, use the "Backup registers" function in the CPS, and zip the file and then post it here
In the CPS.
Make sure you select the Radio Type as MD-9600/UV380 etc
In the Extras menu item select "OpenGD77 support"
On the OpenGD77 support screen, press the "Backup registers" button.
This will prompt to save the file.
After the file has been saved, zip it and post it here
We need this data for multiple versions of the UV380/390 PLUS radios, both 5W and 10W to try to understand the manufacturer settuings which may be affecting the display operation on the 10W version of the UV380/390
In the CPS.
Make sure you select the Radio Type as MD-9600/UV380 etc
In the Extras menu item select "OpenGD77 support"
On the OpenGD77 support screen, press the "Backup registers" button.
This will prompt to save the file.
After the file has been saved, zip it and post it here
We need this data for multiple versions of the UV380/390 PLUS radios, both 5W and 10W to try to understand the manufacturer settuings which may be affecting the display operation on the 10W version of the UV380/390