Connecting to CPS problem
Connecting to CPS problem
Hi, now I have a bigger problem. My radio (TYT MD-UV380) is half-freezing when I trying to upload something to it. By „half-freezing” I mean that the radio react for ex. buttons click but only to „wake up” screen. I can’t change channel or anything else. On PC I see just „Error connecting to the radio”. I looked for this device in Device Manager and I was suprised, because device had good drivers. My next move was reinstall CPS, and it didn’t help too. I restart my PC and it still doesn’t work correctly. Radio normally shuts down with goodbye screen and normally starts and works. I’m sure for that I correctly connect programming cable. Does anybody had same problem?
Re: Connecting to CPS problem
I managed to solve the problem. It turned out that I accidentally set "GPS: NMEA" on the radio instead of "GPS: ON". Changing this setting to "ON" or "OFF" allowed CPS to be used again to win the codeplug. (I'm not sure if I wrote the settings correctly, my radio is set in Polish)
Re: Connecting to CPS problem
When set to NMEA the radio uses the USB port to output the GPS sentences so that they can be used by another device.
As you found, when in this mode the CPS communication can be affected.
I know that Roger looked into this but was unable to come up with a reliable way to make both modes compatible.
Colin G4EML.
As you found, when in this mode the CPS communication can be affected.
I know that Roger looked into this but was unable to come up with a reliable way to make both modes compatible.
Colin G4EML.
Re: Connecting to CPS problem
Dear,
thanks for the new information for me
Regards
thanks for the new information for me
Regards