TYT MD390 - Not able to receive DMR.

Post Reply
S58SMS
Posts: 153
Joined: Mon Dec 20, 2021 8:00 am

Re: TYT MD390 - Not able to receive DMR.

Post by S58SMS » Tue Nov 29, 2022 9:21 am

I usually double check correct TS, correct CC, correct group. If you receieve a signal and there is no modulation, it's probably one of the reasions. You can also try in promiscous mode - ts filter off, cc check on. If not, than you might recieve only no call burst from a repeater.

EU1AEQ
Posts: 141
Joined: Sat Jan 30, 2021 7:25 pm

Re: TYT MD390 - Not able to receive DMR.

Post by EU1AEQ » Tue Nov 29, 2022 9:51 am

fatmaster wrote:
Tue Nov 29, 2022 9:19 am
I have installed the latest firmware to my UV390 following the provided instructions. For some reason I can't get DMR to work at all. I have set up my codeplug and I can see that a signal is being received but there is no audio and nothing shows up in "last heard". Any idea what I might be doing wrong? I did have things working just fine on the stock firmware, and I am thinking I did something wrong in my codeplug.
viewtopic.php?f=19&t=2380#p19678
In the OpenGD77CPS, set the radio type to MD9600 / MD-UV380
In the OpenGD77CPS, select the MD9600 / MD-UV380 firmware loader from the Extras menu.
On the firmware loader screen , select the radio type as MD-UV-380
If you have not already selected the MD9600 ‘donor’ firmware, Press the “Select official firmware (donor) file” button and select the file you extracted from the MD9600 firmware package.
MD9600-CSV(2571V5)-V26.45.bin

Now press “Select Open firmware file & update”, select the OpenUV380 firmware, and the firmware installation process should start.

Post Reply