ALPHA 2022-10-16-01

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-16-01/ RX

Post by VK3KYY » Sun Oct 16, 2022 11:09 pm

CU7AAZ wrote:
Sun Oct 16, 2022 10:23 pm
Hi to All
Something is happening at the reception, I am 8 km away from a UHF repeater, without obstacles. RT3S connected to outdoor antenna. Normally I get maximum signal, full scale. With rssi of -106db. Before the rssi was -70db +/-. With the radio antenna I had no reception inside the house. I also notice the same with VHF repeaters near me

I tested it with another equipment and the signals are ok.
I don't know if it's the firmware or the hardware...

I don't know if anyone else is having the same problem :roll:

Thanks !!
73s
Try on Eco mode 0

EU1AEQ
Posts: 141
Joined: Sat Jan 30, 2021 7:25 pm

Re: ALPHA 2022-10-16-01

Post by EU1AEQ » Mon Oct 17, 2022 8:40 am

The absence of sound at the incoming signal was noticed twice (the green LED was on).
1 case. The station was presumably in waiting. More precisely, I do not remember, the sound, it seems, was not in the DMR. Turning the valcoder left-right restored the sound. The event happened unexpectedly, I was not ready.
2 case. The station was in scan. There was no reception on FM. The backlight is in the "buttons" mode, pressing the Fn button turned on the screen, but the sound appeared only after manipulating the valcoder.

ECO=3 is used.In

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-16-01

Post by VK3KYY » Mon Oct 17, 2022 8:51 am

What is a "valcoder"

CU7AAZ
Posts: 76
Joined: Sat Mar 26, 2022 8:13 pm
Location: Azores

Re: ALPHA 2022-10-16-01/ RX

Post by CU7AAZ » Mon Oct 17, 2022 9:51 am

VK3KYY wrote:
Sun Oct 16, 2022 11:09 pm
CU7AAZ wrote:
Sun Oct 16, 2022 10:23 pm
Hi to All
Something is happening at the reception, I am 8 km away from a UHF repeater, without obstacles. RT3S connected to outdoor antenna. Normally I get maximum signal, full scale. With rssi of -106db. Before the rssi was -70db +/-. With the radio antenna I had no reception inside the house. I also notice the same with VHF repeaters near me

I tested it with another equipment and the signals are ok.
I don't know if it's the firmware or the hardware...

I don't know if anyone else is having the same problem :roll:

Thanks !!
73s
Try on Eco mode 0
I did the test in all ECO mode

Thanks

EU1AEQ
Posts: 141
Joined: Sat Jan 30, 2021 7:25 pm

Re: ALPHA 2022-10-16-01

Post by EU1AEQ » Mon Oct 17, 2022 10:00 am

VK3KYY wrote:
Mon Oct 17, 2022 8:51 am
What is a "valcoder"
Channel selector knob, Rotatory encoder)))

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-16-01

Post by VK3KYY » Mon Oct 17, 2022 10:06 am

EU1AEQ wrote:
Mon Oct 17, 2022 10:00 am
VK3KYY wrote:
Mon Oct 17, 2022 8:51 am
What is a "valcoder"
Channel selector knob, Rotatory encoder)))
OK

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA 2022-10-16-01

Post by VK3KYY » Mon Oct 17, 2022 10:31 am


Locked