Page 8 of 28

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Sat Oct 01, 2022 8:12 pm
by EU1AEQ
G4EML wrote:
Sat Oct 01, 2022 6:43 pm
The RSSI and the S Meter are not calibrated on any of the radio models. The readings will differ between radios and between radio types. This is just an indication, it does not mean that there is a difference in receive performance.
S-metr adequately shows the signal strength
1.png
1.png (65.51 KiB) Viewed 1481 times

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Sun Oct 02, 2022 9:47 pm
by VK3KYY
gipi2005 wrote:
Sun Oct 02, 2022 9:33 pm
VK3KYY wrote:
Wed Sep 21, 2022 6:00 am
EU1AEQ wrote:
Wed Sep 21, 2022 5:39 am


"* If radio is in power saving. DMR Tx needs 2 x press of the PTT. First press just seems to exit power saving the next press causes transmission.
This problem does not exist on FM, its DMR only"
- On ECO-1, the transmission is not blocked in the dmr after a long wait. Checked.
Probably the bocking happens depending on the internal phase of eco mode when you press the PTT.
All power saving, including in the official firmware, enables and disables the Rx chip. So probably if PTT is pressed when the Rx chip if sleeping then it won't transmit.
The problem may occur both on DMR and FM but I only saw it on DMR.

Also the different Eco modes change multiple perameters with the sleep / wake cycle etc etc
Hi,
I have update my UV380 and I have problem with trasmission as reported here. I push PTT several time but only few times it goes in trasmission.
This happen both in FM and DMR mode.
Problem is present in power save from 0 to 5
Any advice?
Thanks
Giuliano
The next update may fix this

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Mon Oct 03, 2022 2:53 am
by VK3KYY
Gustavo G Carlo wrote:
Mon Oct 03, 2022 2:47 am
Parabéns pelo ótimo trabalho em equipe estou testando o OPENGD77 no projeto "ALFA" com 2 (dois)radios Retevis RT3S e estou surpreendido com a qualidade do projeto, parabéns.

Gostaria de sugerir que estudem a possibilidade de ter a opção de escolher a prioridade entre: a lista de contatos ou do TALKER ALIAS do radio RT3S com o OpenGD77, este recurso esta diponível em varios rádios de qualidade.

Vi nas orientações de instalação a recomendação de guardar o arquivo flash do RT3S pois serve para retornar o RT3S ao modelo original de fabrica.

Informo que realizei esse teste com o arquivo flash armazenado e o radio retornou a sua condição original de fabrica com facilidade.

Claro que imediatamente voltei o Retevis RT3S para o OPENGD77 pois o projeto "ALFA" é o nosso maior interesse.

Observei que um video nos comentários, foi removido por "epsstos" no dia 29 de setembro de 2022 7:54 pm.

Esse video mostrava o retorno a condição original de fabrica do RT3S utilizando o arquivo flash, até utilizei como orientativo para fazer o teste que apresentei o resultado hoje.

Gostaria de saber quais são os critérios de não cometer erros para postar comentários ou links para videos nesse forum, pois fiquei preocupado com a forma que foi realizada o bloqueio de um colaborador que estava contribuido para o forum do Projeto "ALFA" para o RT3S.

Obrigado Gustavo
Posts must be in english.

Just use Google translate before your post.

If you post any more non-english posts they will be deleted

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Mon Oct 03, 2022 3:15 am
by PU4BLA
Defining the rules well, everything is easier, I will post in English but please I would like a link to know better the rules of the Forum.

TKS/73

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Mon Oct 03, 2022 3:19 am
by PU4BLA
I don't need google translate, I will post in english, sorry.

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Mon Oct 03, 2022 6:31 am
by VK3KYY
New Alpha version

viewtopic.php?f=19&t=2409

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Mon Oct 03, 2022 8:04 pm
by VK3KYY
Eclipse wrote:
Mon Oct 03, 2022 2:12 pm
Got this on my RT3S and its working great!, I absolutely love using this and prefer it over the stock RT3S firmware. Would it be possible to get a talk permit tone and be able to customise it's tone to create a motorola MDC-1200 tone for example or the stock RT3S talk permit tone or a DTMF tone,

Regards Eclipse,
Firmware already has Tx start tone etc

See the OpenGD77 User Guide

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Tue Oct 04, 2022 2:32 pm
by Ik0nwg
Eclipse wrote:
Tue Oct 04, 2022 1:13 pm
i cant find it anywhere in the menu, is it a specific menu option that isnt available in other openGD77 firmwares?
menu
option
sound option

prompt:beep
dmr beep: both
rx beep: both
talker: both

See the OpenGD77 User Guide


Ciao

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Wed Oct 05, 2022 12:51 am
by VK3KYY
Eclipse wrote:
Tue Oct 04, 2022 11:12 pm
Ahhhh, I already had it on. It was so quiet I didn't even know it was on, thanks for letting me know!
You can change the beep volume. i.e this changes it for all beeps.

Most people don't want loud beeps.

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Posted: Wed Oct 05, 2022 12:52 am
by VK3KYY
Eclipse wrote:
Tue Oct 04, 2022 11:12 pm
Ahhhh, I already had it on. It was so quiet I didn't even know it was on, thanks for letting me know!
BTW. What is your callsign ?