TYT MD-UV380 / RT-3S Installation information

TA1ECA
Posts: 30
Joined: Thu Sep 29, 2022 7:55 pm

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by TA1ECA » Mon Oct 24, 2022 9:56 am

VK3KYY wrote:
Mon Oct 24, 2022 9:30 am
TA1ECA wrote:
Mon Oct 24, 2022 9:26 am
EU1AEQ wrote:
Mon Oct 24, 2022 8:57 am


Use a VPN.
Thank you for your swift response. But yes, I already tried that. I think there is a temporary malfunction on the website. I will try again within few hours.
Its working for me now.

Perhaps something is blocking your access to the site.
Yes, I was just able to access the website using Tor Browser.

TA1ECA
Posts: 30
Joined: Thu Sep 29, 2022 7:55 pm

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by TA1ECA » Tue Oct 25, 2022 9:11 am

I got some errors while installing OpenGD77 on my TYT MD-UV390. I downloaded the latest OpenGD77-CPS, firmware and donation file. There is no problem in getting into DFU mode and seeing DFU mode on the computer. But I can't flash the firmware to my beloved TYT radio.

Here are some screenshots
Ekran görüntüsü 2022-10-25 104436.png
Ekran görüntüsü 2022-10-25 104436.png (64.82 KiB) Viewed 1469 times

What might be the problem?

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by VK3KYY » Tue Oct 25, 2022 9:29 am

Did you install the DFU driver?

Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS

TA1ECA
Posts: 30
Joined: Thu Sep 29, 2022 7:55 pm

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by TA1ECA » Tue Oct 25, 2022 9:42 am

VK3KYY wrote:
Tue Oct 25, 2022 9:29 am
Did you install the DFU driver?

Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS
Yes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by VK3KYY » Tue Oct 25, 2022 9:56 am

TA1ECA wrote:
Tue Oct 25, 2022 9:42 am
VK3KYY wrote:
Tue Oct 25, 2022 9:29 am
Did you install the DFU driver?

Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS
Yes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.
What driver did you install ?

My driver version is showing as 3.0.4.0

What USB VID/PID is your radio showing as in the Windows device manager?

TA1ECA
Posts: 30
Joined: Thu Sep 29, 2022 7:55 pm

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by TA1ECA » Tue Oct 25, 2022 10:45 am

VK3KYY wrote:
Tue Oct 25, 2022 9:56 am
TA1ECA wrote:
Tue Oct 25, 2022 9:42 am
VK3KYY wrote:
Tue Oct 25, 2022 9:29 am
Did you install the DFU driver?

Also. I don't know why you referenced the donor file. You do not upload the donor file to the radio, the donor file is automatically merged by the CPS
Yes, I choose donor file via CPS as stated in your YouTube video. I think the DFU driver is fine; as I see STM device in DFU Mode prompt in device manager. I also tried to flash the original firmware to make sure the DFU driver works. Not any problem appeared.
What driver did you install ?

My driver version is showing as 3.0.4.0

What USB VID/PID is your radio showing as in the Windows device manager?
I installed STMicroelectronics 3.0.1.0 version
Ekran görüntüsü_20221025_133143.png
Ekran görüntüsü_20221025_133143.png (28.64 KiB) Viewed 1453 times

USB\VID_0483&PID_DF11REV_0200
Ekran görüntüsü_20221025_133743.png
Ekran görüntüsü_20221025_133743.png (37.48 KiB) Viewed 1453 times

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by G4EML » Tue Oct 25, 2022 2:31 pm

That is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.

Do you have another computer you could try? Just in case something strange has happened with the driver install.

Colin G4EML

TA1ECA
Posts: 30
Joined: Thu Sep 29, 2022 7:55 pm

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by TA1ECA » Tue Oct 25, 2022 5:52 pm

G4EML wrote:
Tue Oct 25, 2022 2:31 pm
That is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.

Do you have another computer you could try? Just in case something strange has happened with the driver install.

Colin G4EML
Yes, that's a good point. I will try with another computer as you suggested. And I will inform immediately.

CU7AAZ
Posts: 76
Joined: Sat Mar 26, 2022 8:13 pm
Location: Azores

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by CU7AAZ » Tue Oct 25, 2022 6:10 pm

TA1ECA wrote:
Tue Oct 25, 2022 5:52 pm
G4EML wrote:
Tue Oct 25, 2022 2:31 pm
That is the same version driver that I am using. So it is unlikely that the driver is your problem.
If the radio is not connected or is not in DFU mode then the error message is different. So presumably your radio is being seen by the driver.

Do you have another computer you could try? Just in case something strange has happened with the driver install.

Colin G4EML
Yes, that's a good point. I will try with another computer as you suggested. And I will inform immediately.
Hi

try this version - https://drive.google.com/file/d/1gITDj6 ... sp=sharing


good luck

73s

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: ALPHA TYT MD-UV380 / RT-3S Installation information

Post by VK3KYY » Tue Oct 25, 2022 9:56 pm

The error is that the DFU driver and radio is responding with an error to the STDFU_SelectCurrentConfiguration command
Unfortunately, this functionality is contained inside the DLL files from STM, and not something which we have control over.

How old is your radio. What model is it? UV380 or RT3S ??

Post Reply