tone decode

[W8LDO]

i have had a history of tone decode problems. Found another tone that don't decode. Haven't tested all but no luck with 116N digital tone. Anyone else with tone issues? This is on the MD9600

[G4EML]

I have just tested D116N on my MD9600 and it is working OK.

[W8LDO]

Just checked mine on vfo and it worked there but not on the memory channel. that is strange

[W8LDO]

Switched back to the vfo after checking memory again and now it don't work on the vfo. strange very strange

[W8LDO]

Powered down rig and restarted now its working again in the vfo. not making any sense here

[G4EML]

When you are changing the DCS code make sure that you are saving the change using SK2 + Green.

If you only press Green then the change is not permanent and changing channel or switching VFO/Memory will revert to the previous setting.

[W8LDO]

Doesn't work as a saved channel. Then scan

[W8LDO]

they changed the tone on the new repeater for me from the D116N to D311N and it works fine. Not sure what the issue is with the 116N on the TYT