MD9600 and Calibration data - adjustable?

[SA0BUX]

Isn't the frequency calibration on MD-9600 inside the radio?
Or can you do it via the software now?

Software now.

Nice!

[G4EML]

You can now do it by software, but I would still advise doing it using the analogue pots if you can, especially for large changes. There may be unknown side effects when adjusting the software values on these radios. Presumably TYT fitted the pots for a reason.

Colin G4EML

[F1UPC]

Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!

[F1RMB]

Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!

Procedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen

[F1UPC]

Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!

Procedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen

Merci ! 73's !

[F1UPC]

Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!

Procedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen

I found that permanent save is done by pressing P1(sk1) + ENT(green), the procedure says P2(sk2) + ENT(green)...

[F1RMB]

Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!

Procedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen

I found that permanent save is done by pressing P1(sk1) + ENT(green), the procedure says P2(sk2) + ENT(green)...

P1 is SK2 on the MD9600 https://github.com/LibreDMR/OpenGD77_Us ... 0-specific