Nice!
MD9600 and Calibration data - adjustable?
Re: MD9600 and Calibration data - adjustable?
You can now do it by software, but I would still advise doing it using the analogue pots if you can, especially for large changes. There may be unknown side effects when adjusting the software values on these radios. Presumably TYT fitted the pots for a reason.
Colin G4EML
Colin G4EML
Re: MD9600 and Calibration data - adjustable?
Hello !
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!
I tried to do power calibration but data is not saved when i power off and on the radio... If i don't power off (green button) the radio the cal values are kept. What's wrong ? Thank you !!
Re: MD9600 and Calibration data - adjustable?
Re: MD9600 and Calibration data - adjustable?
Merci ! 73's !F1RMB wrote: ↑Thu Dec 21, 2023 6:04 pmProcedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Re: MD9600 and Calibration data - adjustable?
I found that permanent save is done by pressing P1(sk1) + ENT(green), the procedure says P2(sk2) + ENT(green)...F1RMB wrote: ↑Thu Dec 21, 2023 6:04 pmProcedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen
Re: MD9600 and Calibration data - adjustable?
P1 is SK2 on the MD9600 https://github.com/LibreDMR/OpenGD77_Us ... 0-specificF1UPC wrote: ↑Fri Dec 22, 2023 8:13 amI found that permanent save is done by pressing P1(sk1) + ENT(green), the procedure says P2(sk2) + ENT(green)...F1RMB wrote: ↑Thu Dec 21, 2023 6:04 pmProcedure is detailed in the manual
https://github.com/LibreDMR/OpenGD77_Us ... ion-screen