OpenGD77

Doc says in this section:
https://github.com/LibreDMR/OpenGD77_Us ... a-to-radio

TYT MD-9600 | Retevis RT-90
Hold the green power button and the orange button, while applying 12V power to the radio. Note updating the OpenGD77 firmware to a newer version does not require the power to be removed and reconnected

But I believe the buttons to press are P1 and Orange while one turns on the power supply to the radio

That is what worked for me.

KC1LKO

KC1LKO wrote: ↑

Mon May 22, 2023 8:19 pm

Doc says in this section:
https://github.com/LibreDMR/OpenGD77_Us ... a-to-radio

TYT MD-9600 | Retevis RT-90
Hold the green power button and the orange button, while applying 12V power to the radio. Note updating the OpenGD77 firmware to a newer version does not require the power to be removed and reconnected

But I believe the buttons to press are P1 and Orange while one turns on the power supply to the radio

That is what worked for me.

KC1LKO

Yes, I think it may be a typo.

First time when you flash from native to Opengd77 you must attach the power cable (or power on the psu) when holding Orange +P1.

When Opengd77 is installed you can have power cable attached and only need to hold Orange+P1 and then power on with the power switch on the radio..

Yes.

I think the text needs to be updated