Is this a typo in doc for 9600 DFU mode?

Post Reply
KC1LKO
Posts: 3
Joined: Wed Dec 11, 2019 12:42 pm

Is this a typo in doc for 9600 DFU mode?

Post by KC1LKO » Mon May 22, 2023 8:19 pm

Doc says in this section:
https://github.com/LibreDMR/OpenGD77_Us ... a-to-radio
TYT MD-9600 | Retevis RT-90
Hold the green power button and the orange button, while applying 12V power to the radio. Note updating the OpenGD77 firmware to a newer version does not require the power to be removed and reconnected
But I believe the buttons to press are P1 and Orange while one turns on the power supply to the radio

That is what worked for me.

KC1LKO

SA0BUX
Posts: 543
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: Is this a typo in doc for 9600 DFU mode?

Post by SA0BUX » Mon May 22, 2023 9:58 pm

KC1LKO wrote:
Mon May 22, 2023 8:19 pm
Doc says in this section:
https://github.com/LibreDMR/OpenGD77_Us ... a-to-radio
TYT MD-9600 | Retevis RT-90
Hold the green power button and the orange button, while applying 12V power to the radio. Note updating the OpenGD77 firmware to a newer version does not require the power to be removed and reconnected
But I believe the buttons to press are P1 and Orange while one turns on the power supply to the radio

That is what worked for me.

KC1LKO
Yes, I think it may be a typo.

First time when you flash from native to Opengd77 you must attach the power cable (or power on the psu) when holding Orange +P1.

When Opengd77 is installed you can have power cable attached and only need to hold Orange+P1 and then power on with the power switch on the radio..

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Is this a typo in doc for 9600 DFU mode?

Post by VK3KYY » Tue May 23, 2023 9:39 pm

Yes.

I think the text needs to be updated

Post Reply