OpenGD77

New Beta version is available

https://opengd77.com/downloads/MD9600/F ... 7a2492af79
https://opengd77.com/downloads/MD9600/Firmware/Latest

1. This version fixes a bug in DCS Rx
2. Removes unused / redundant settings in Display options, for LED and Battery voltage / % display
3. Manual backlight can be toggled using P2 on the front panel
4. Fixes bug with settings being lost when the backup battery goes flat, by using the Flash memory for settings storage

very good...tested and approved...

PU2PWR wrote: ↑

Tue Feb 28, 2023 10:39 am

very good...tested and approved...

Believe it or not, it does get tested for several days by multiple people before it is posted to the forum

I believe, and we can only thank you and everyone who collaborates...

Do you have Mode set to manual in display options?

-N1KY

Tested on my V2 HW, P2 works fine with manual backlight mode.

Ignore this newbie over here (me), my antenna setup was bad.

Thanks,

KE8WPJ

Ignore this newbie over here (me), my antenna setup was bad.

Thanks,

KE8WPJ

KE8WPJ wrote: ↑

Fri Mar 10, 2023 1:49 pm

FWIW I just reflashed the beta again, and tested again.

The first transmission I made after switching from digital to analog at 40 watts was successful. The second transmission on analog gave the following on the display.

https://ibb.co/vZCP0J6

Hi,

Have you checked your line (SWR and so on) ?

Ignore this newbie over here (me), my antenna setup was bad.

Thanks,

KE8WPJ