Time,Date and Location Settings

Post Reply
MM0EFJ
Posts: 5
Joined: Sat Jan 21, 2023 7:24 pm

Time,Date and Location Settings

Post by MM0EFJ » Sun Jan 29, 2023 3:50 pm

I can bring up the above on my MD9600 but how do I change the values ?
ie what buttons should I press?
Regards,

Mike MM0EFJ

OE1MWW
Posts: 106
Joined: Sat Oct 17, 2020 2:20 pm
Location: JN88EG
Contact:

Re: Time,Date and Location Settings

Post by OE1MWW » Sun Jan 29, 2023 4:52 pm

It's all in here:
https://github.com/LibreDMR/OpenGD77_Us ... r_Guide.md
Buttons on mic and on front panel

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: Time,Date and Location Settings

Post by G4EML » Sun Jan 29, 2023 4:59 pm

Numeric keys on Mic.

A/B key to enter

When Entering Lat/Long use the Up/Down to select N or S
Long press D then Up/Down to switch E or W

Colin G4EML

MM0EFJ
Posts: 5
Joined: Sat Jan 21, 2023 7:24 pm

Re: Time,Date and Location Settings

Post by MM0EFJ » Sun Jan 29, 2023 9:29 pm

Thanks guys for the explanations.
Now sorted
Regards
Mike MM0EFJ

ve2bap
Posts: 4
Joined: Wed Feb 15, 2023 10:26 pm

Re: Time,Date and Location Settings

Post by ve2bap » Sun Mar 05, 2023 10:01 pm

Hello, I also want to setup date & time on my TYT MD-9600, running OpenGD77 (update 2023-02-28). Instructions mentionned here don't work on my radio :cry: User guide says "press on green button", but if I do this, radio turns off (this is the power button).
Pressing on A/B or # doesn't work either.
I did something wrong? Thank you.

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: Time,Date and Location Settings

Post by G4EML » Sun Mar 05, 2023 10:48 pm

Data is entered using the A/B button on the microphone or the ENT button on the radio.

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Time,Date and Location Settings

Post by VK3KYY » Sun Mar 05, 2023 10:58 pm

nomenclaturein the user guide relates to the handheld radios where the Green button is the Enter / Menu button


The MD-9600 button equivalent is documented in the User Guide

https://github.com/LibreDMR/OpenGD77_Us ... 0-specific

Post Reply