Alpha version available for download

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Alpha version available for download

Post by VK3KYY » Wed Apr 13, 2022 3:49 am

Language translation update for Italian and Gernam users

See

downloads/MD9600/Firmware/819b259a37c4a ... 1dc3be1e5d

No new features or bug fixes are in this version

TA2KW
Posts: 13
Joined: Sat Apr 09, 2022 7:32 pm
Location: KN40PP
Contact:

Re: Alpha version available for download

Post by TA2KW » Wed Apr 13, 2022 9:47 am

VK3KYY wrote:
Tue Apr 12, 2022 10:37 pm
Can you check what driver version is installed

I'm using driver version 3.0.4.0 (5/07/2012)

Which seems to be the version Windows automatically installed.

Also what USB VID/PID "Hardware Ids" does your radio appear as when in upload mode.



BTW.

The problem is not occurring when sending the 'custom' unlocking command, its occuring when the loader send the "Select Current Configuration" command.

Unfortunately, I searched for "STDFU_SelectCurrentConfiguration" to find out what this does, but there does not appear to be any usefull information about this command anywhere on the internet.
these are the dfu drivers installed.

Image

Am I the only one in the world having this problem? I am very curious :)

TA2KW
Posts: 13
Joined: Sat Apr 09, 2022 7:32 pm
Location: KN40PP
Contact:

Re: Alpha version available for download

Post by TA2KW » Wed Apr 13, 2022 10:07 am

usb info in setup mode

Image

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Alpha version available for download

Post by VK3KYY » Wed Apr 13, 2022 10:17 am

You appear to have 2 versions of the driver installed 3.0.1 and 3.0.4, this seems unusual

TA2KW
Posts: 13
Joined: Sat Apr 09, 2022 7:32 pm
Location: KN40PP
Contact:

Re: Alpha version available for download

Post by TA2KW » Wed Apr 13, 2022 11:06 am

VK3KYY wrote:
Wed Apr 13, 2022 10:17 am
You appear to have 2 versions of the driver installed 3.0.1 and 3.0.4, this seems unusual

I completely removed the driver and updated it from the windows update section again, the end is disappointed again


Image

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Alpha version available for download

Post by VK3KYY » Wed Apr 13, 2022 11:24 am

You could try using the driver from STM themselves. I think its part of their STM DFUSE application

TA2KW
Posts: 13
Joined: Sat Apr 09, 2022 7:32 pm
Location: KN40PP
Contact:

Re: Alpha version available for download

Post by TA2KW » Wed Apr 13, 2022 11:36 am

VK3KYY wrote:
Wed Apr 13, 2022 11:24 am
You could try using the driver from STM themselves. I think its part of their STM DFUSE application

The original "RT90-CSV-V07.24.bin" firmware is loaded without any problems.


Image

i stop dealing with it
Thank you for your interest.
Good day.

OZ1MAX
Posts: 36
Joined: Sat Nov 16, 2019 11:43 pm

Re: Alpha version available for download

Post by OZ1MAX » Wed Apr 13, 2022 12:21 pm

Had the same problem later, org firmware ok, but not the OpenMD9600, i just followed the install info to the end, and then mine worked ok... no new drivers here ... simply used the installed driver to load the firmware in the new Firmware uploader ,,,

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Alpha version available for download

Post by VK3KYY » Wed Apr 13, 2022 9:07 pm

OZ1MAX wrote:
Wed Apr 13, 2022 12:21 pm
Had the same problem later, org firmware ok, but not the OpenMD9600, i just followed the install info to the end, and then mine worked ok... no new drivers here ... simply used the installed driver to load the firmware in the new Firmware uploader ,,,
Can you tell us more details

OZ1MAX
Posts: 36
Joined: Sat Nov 16, 2019 11:43 pm

Re: Alpha version available for download

Post by OZ1MAX » Thu Apr 14, 2022 7:52 am

Roger

Just followed the instructions for install, i just forgot the host fil or donor file, thats what was the biggest issure in my casse, i´m not using any other STM drivers, just the drivers for my GD77 installed from the CPS .. nothing else changed ...

Post Reply