Alpha version available for download

[VK3KYY]

Just a side note, but probably important, cause many people will try FW/CPS now...

User ID database at RadioID.net is currently broken.

(File: user.csv 12450945 2022-03-05 05:01:04)

So, don't blame CPS.

Thanks.

Use Download from URL, this takes the dara from a curated file on Github

[9a3lj]

My md 9600 does not work with the software I found with you my software is MD9600-GPS-REC-S06.24.bin can you send me the software to work with my MD9600.Thanks

[VK3KYY]

My md 9600 does not work with the software I found with you my software is MD9600-GPS-REC-S06.24.bin can you send me the software to work with my MD9600.Thanks

This is not enough information.

What do you man "Does not work"? Does not boot, does not transmit , does not receive ?????

Did you load the OpenMD9600 firmware version which matches your hardware ?

If so what hardware version do you have. This information is written on the top of the main PCB. It is not the information displayed in the official CPS.

[9a3lj]

Data from the device are SU: Serial number: 1711A000057
CPS software version 01.00
Hardware version V2.06
MCU version P006.009
On PCB: MD9600-UV-V2.1-170608
When I put openGD firmware I can't program it with openGd cps I program but it says it's 16 and will switch to 80 channels I return the original software and everything works normally. I would like to try openGD firmware I tried with more firmware always the same. Thanks 73 de 9A3LJ

[VK3KYY]

Data from the device are SU: Serial number: 1711A000057
CPS software version 01.00
Hardware version V2.06
MCU version P006.009
On PCB: MD9600-UV-V2.1-170608
When I put openGD firmware I can't program it with openGd cps I program but it says it's 16 and will switch to 80 channels I return the original software and everything works normally. I would like to try openGD firmware I tried with more firmware always the same. Thanks 73 de 9A3LJ

You are using a very old GD77 codeplug, whose structure is 16 instead of 80 channels per zone. This was updated about 2 years ago.

The CPS attempts to update the codeplug, but your codeplug seems very old, so you may need to make a new codeplug

[9a3lj]

I made a new code plack loaded it but MD9600 doesn't see which firmware should opengd load in MD9600 in your opinion 73 de 9A3LJ-OE4GZC

[VK3KYY]

I made a new code plack loaded it but MD9600 doesn't see which firmware should opengd load in MD9600 in your opinion 73 de 9A3LJ-OE4GZC

You have V2 hardware, you need to install the firmware for V2 hardware, otherwise Tx and Rx will not function.

[9a3lj]

I also tried with Alfa ver: firmware_V2HW.bin
firmware_V4HW.bin
firmware_V5HW.bin for my MD9600?

[VK3KYY]

I also tried with Alfa ver: firmware_V2HW.bin
firmware_V4HW.bin
firmware_V5HW.bin for my MD9600?

V5 does not match your hardware. If you loaded V5 , Tx and Rx will not work.

Please esplain what is not working.

Is display working, showing channels or VFO etc ??

[9a3lj]

I think I tried to put firmware_V2HW.bin made a new codeplack and loaded it into the device but the device does not see it
There is nothing in the zones, there are nothing channels, although I loaded with OpenGD77 CPS (Version: E2021.09.14.01) my device does not see what I loaded when I press Zones, there is nothing in the zones.73 de 9A3LJ-OE4GZC