Alpha version available for download
Re: Alpha version available for download
thanks, guess i'll order another rt90 and find out.
EDIT: 9th April 22
Received a v5 this time, speaker pop is still there but installed opengd77 and enabled click suppression and its much less noticeable.
EDIT: 9th April 22
Received a v5 this time, speaker pop is still there but installed opengd77 and enabled click suppression and its much less noticeable.
Re: Alpha version available for download
I applied Colin G4EML's hardware mod to fix the speaker pop. My radio was v5 and the mod totally removed the pop.VK3KYY wrote: ↑Wed Apr 06, 2022 7:13 amThe click is clearly audible but less harsh.deadite66 wrote: ↑Wed Apr 06, 2022 5:39 amhow much does the speaker click suppression setting reduce the problem, ordered a rt90 last weekend but sent it back to amazon as the pop was very annoying, from the serial number it was a v4 which shouldn't have had the problem.
i didn't realize at the time opengd77 had a port for it but it kinda put me off buying another to try it.
There are hardware modifications which have roughly the same effect.
Neither the hardware or software fix completely removed this click
https://www.pc5e.nl/downloads/rt82/manu ... bridge.pdf
Re: Alpha version available for download
Hello
Does this work on rt 90, version v1, cps 01.27, s005.004?
Does this work on rt 90, version v1, cps 01.27, s005.004?
Re: Alpha version available for download
Hi,
Yes as RT-90 are MD9600 clones, but you need to remove the top cover to check the revision printed on the PCB to be sure which firmware version to install.
Cheers.
---
Daniel
Yes as RT-90 are MD9600 clones, but you need to remove the top cover to check the revision printed on the PCB to be sure which firmware version to install.
Cheers.
---
Daniel
Re: Alpha version available for download
Thank you very much. I will test it.
Re: Alpha version available for download
hi, I am using retevis RT90 HW V2.1
i get this error when i want to install ALFA 2022-04-03 version.
I read the installation information, what am I doing wrong?
I'm getting this error, can you take a look at the issue?
https://www.facebook.com/photo/?fbid=20 ... 1972791038
thanks
Re: Alpha version available for download
Hi,
Can you confirm that your radio is in firmware update mode?
From viewtopic.php?f=18&t=2035
"by holding the orange and P1 buttons when applying power to the radio. The display backlight will flash and the display will be blank"
Regards Mike
Can you confirm that your radio is in firmware update mode?
From viewtopic.php?f=18&t=2035
"by holding the orange and P1 buttons when applying power to the radio. The display backlight will flash and the display will be blank"
Regards Mike
Re: Alpha version available for download
VK4MWL wrote: ↑Sun Apr 10, 2022 10:29 amHi,
Can you confirm that your radio is in firmware update mode?
From viewtopic.php?f=18&t=2035
"by holding the orange and P1 buttons when applying power to the radio. The display backlight will flash and the display will be blank"
Regards Mike
yes.
https://www.facebook.com/10000475531215 ... 124392063/
Re: Alpha version available for download
Your version of Windows probably didn't automatically install the STM DFU (Device firmware update) driver.
Put the radio into update mode and check the radio appears as a STM DFU device, and if not you'll need to install the STM DFU driver