TYT MD-9600 / Retevis RT-90 : Experimental version

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by VK3KYY » Fri Aug 26, 2022 5:36 am

SA0BUX wrote:
Fri Aug 26, 2022 5:27 am
I needed to set the DMR mic gain to -9 dB , otherwise it was terrible overmodulated.
FM seems to sound good with 0 dB but I changed it to -3 dB now for some testing.

I also changed DMR RX AGC to +3 dB

Using a TYT MD-9600 V2.1
The default FM gain will be changed in the next beta.

DMR Rx gain seems to be personal choice. Most people said the 0dB gain on the AGC is OK.

Its also possible the AGC will be modified in the next Beta, so not use the output DAC on the C6000, as this causes some compatibilities.
Instead the AGC will be probably be applied to the audio samples themselves.

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by G4EML » Sun Aug 28, 2022 9:32 am

ve7mdt wrote:
Sun Aug 28, 2022 5:48 am
I know this is OT, so please remove this post if it's deemed imappropriate.

I think if an MD-9600 is modified with the OpenGD77 firmware, it is no longer in compliant with FCC's Type Acceptance with the radio (under the Type 90 / 95 etc that is required for commercial, GMRS etc service), and thus, not legal to transmit on those frequencies. I think the TYT radio might have gained Type Acceptance w/ the FCC, but only if it is kept unmodified, and firmware modification is considered a modified radio.
Quite correct. That is one of the reasons the firmware licence specifically states that it is for amateur radio use only.

This has been discussed several times before. The rules vary around the world but most countries require that equipment be type approved for the service it is used on. That type approval includes the firmware. This Open firmware is not approved and so using it will invalidate any certification.

Some amateur radio licence classes may have the same restriction, but most full Amateur licences allow the use of self constructed equipment and non type approved equipment.

Colin G4EML

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by VK3KYY » Sun Aug 28, 2022 10:45 am

ve7mdt wrote:
Sun Aug 28, 2022 5:48 am
I know this is OT, so please remove this post if it's deemed imappropriate.

I think if an MD-9600 is modified with the OpenGD77 firmware, it is no longer in compliant with FCC's Type Acceptance with the radio (under the Type 90 / 95 etc that is required for commercial, GMRS etc service), and thus, not legal to transmit on those frequencies. I think the TYT radio might have gained Type Acceptance w/ the FCC, but only if it is kept unmodified, and firmware modification is considered a modified radio.
This applies to any firmware that you load onto any radio, apart from the firmware supplied by the manufacturer, which the FCC has approved.

We occasionally get people posting to the forum, asking questions about using the firmware as part of their commercial operations.
And on each occasion, we have to remind them, that apart from the license on the firmware which states Non Commerial only, they will also be breaking various laws if they use the radio with non-official firmware installed on it

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by VK3KYY » Mon Oct 17, 2022 1:53 am

New Beta version is available

See

viewtopic.php?f=18&t=2428

s57kka
Posts: 6
Joined: Sun Dec 13, 2020 7:25 pm

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by s57kka » Tue Oct 18, 2022 7:53 pm

73!
I need official rt90 firmware v2, because i want to upgrade with opengd77. Can anyone send me link to download, or direct file to mail?
73 DE s57KKA
ales.kuhar@t-2.net

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by VK3KYY » Tue Oct 18, 2022 8:22 pm

s57kka wrote:
Tue Oct 18, 2022 7:53 pm
73!
I need official rt90 firmware v2, because i want to upgrade with opengd77. Can anyone send me link to download, or direct file to mail?
73 DE s57KKA
ales.kuhar@t-2.net
We use V5 official firmware for all hardware versions.

You do not need the officials V2 unless you want to reinstall the official firmware

s57kka
Posts: 6
Joined: Sun Dec 13, 2020 7:25 pm

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by s57kka » Wed Oct 19, 2022 12:29 am

Hi!
No, i want to upgrade to opengd77 and I need official firmware to select it in opengd77cps.

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: TYT MD-9600 / Retevis RT-90 : Experimental version

Post by VK3KYY » Wed Oct 19, 2022 3:00 am

s57kka wrote:
Wed Oct 19, 2022 12:29 am
Hi!
No, i want to upgrade to opengd77 and I need official firmware to select it in opengd77cps.
So why did you post this to the MD9600 section?

Post Reply