[Radio model not supported] New Baofeng 1801 won't enter in upload mode

Anything specifically related to the DM-1801 version of the firmware
S58SMS
Posts: 153
Joined: Mon Dec 20, 2021 8:00 am

Re: Baofeng 1801 not enter in upload mode

Post by S58SMS » Tue Jun 07, 2022 11:32 am

Me too... i will report when it comes.

PS: try with cable for uv5r + the software is new - told by supplier

G1LRO
Posts: 6
Joined: Tue Jun 07, 2022 12:35 pm

Re: Baofeng 1801 not enter in upload mode

Post by G1LRO » Tue Jun 07, 2022 12:39 pm

Hello, I have the same issue with a radio from the same seller.
I have contacted the seller to report the issue and they are going to talk to Baofeng technicians to see what can be done. They seem to be helpful.
Will report back if any progress.
Mark

S58SMS
Posts: 153
Joined: Mon Dec 20, 2021 8:00 am

Re: Baofeng 1801 not enter in upload mode

Post by S58SMS » Tue Jun 07, 2022 12:41 pm

Yes, they respond - so it's not a scam, but we have to figure it out, how to load opengd77 on it.

Is there any difference on hardware?

G1LRO
Posts: 6
Joined: Tue Jun 07, 2022 12:35 pm

Re: Baofeng 1801 not enter in upload mode

Post by G1LRO » Tue Jun 07, 2022 12:44 pm

vselic wrote:
Tue Jun 07, 2022 12:41 pm
Yes, they respond - so it's not a scam, but we have to figure it out, how to load opengd77 on it.

Is there any difference on hardware?
I have never had one of these before so can't answer that. Will wait to see what Baofeng HQ come back with in case perhaps there is a different key combination or will have to be manually flashed with new firmware.

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Baofeng 1801 not enter in upload mode

Post by F1RMB » Tue Jun 07, 2022 1:57 pm

vselic wrote:
Tue Jun 07, 2022 11:32 am
Me too... i will report when it comes.

PS: try with cable for uv5r + the software is new - told by supplier
UV-5R?
This kind of cable have a USB/TTL converter inside. A DM1801/RD-5R cable is just wires and connectors.

G1LRO
Posts: 6
Joined: Tue Jun 07, 2022 12:35 pm

Re: Baofeng 1801 not enter in upload mode

Post by G1LRO » Tue Jun 07, 2022 3:55 pm

Yes that cable has the converter in the USB plug, recognisable as it is a 'fat' USB plug- dongle sized. I have connected this to my 1801 and does allow config of the radio settings via Baofeng software.

It does not affect the behaviour of going into firmware mode though; the green light does not come on with this cable connected. :(

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Baofeng 1801 not enter in upload mode

Post by F1RMB » Wed Jun 08, 2022 1:15 am

Hi,
G1LRO wrote:
Tue Jun 07, 2022 3:55 pm
Yes that cable has the converter in the USB plug, recognisable as it is a 'fat' USB plug- dongle sized. I have connected this to my 1801 and does allow config of the radio settings via Baofeng software.

It does not affect the behaviour of going into firmware mode though; the green light does not come on with this cable connected. :(
Sounds really strange.
I would like to see some pictures of the PCB.


Cheers.
---
Daniel

S58SMS
Posts: 153
Joined: Mon Dec 20, 2021 8:00 am

Re: Baofeng 1801 not enter in upload mode

Post by S58SMS » Wed Jun 08, 2022 7:03 am

Yes, this info was by seller. He will give us an info, how to put into upgrade mode. I hope we manage to install opengd77 on this new station.

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: Baofeng 1801 not enter in upload mode

Post by G4EML » Wed Jun 08, 2022 9:03 am

It sounds suspiciously like this version of the radio is using a different processor, and probably a completely different board.

If it needs a usb to serial chip in the cable then it won’t work with the current OpenGD77 firmware which is written to use the USB features of the processor.

G1LRO
Posts: 6
Joined: Tue Jun 07, 2022 12:35 pm

Re: Baofeng 1801 not enter in upload mode

Post by G1LRO » Wed Jun 08, 2022 10:39 am

G4EML wrote:
Wed Jun 08, 2022 9:03 am
It sounds suspiciously like this version of the radio is using a different processor, and probably a completely different board.

If it needs a usb to serial chip in the cable then it won’t work with the current OpenGD77 firmware which is written to use the USB features of the processor.
I just received this from the seller who has spoken to Baofeng so I fear you are correct:

"they just mentioned that the new version is with different chips, and they didn’t produce the old version for a long time."

Post Reply