DM-1801 not updating to latest firmware

Anything specifically related to the DM-1801 version of the firmware
Post Reply
9W2IXY
Posts: 2
Joined: Sat Oct 09, 2021 11:19 am

DM-1801 not updating to latest firmware

Post by 9W2IXY » Sat Oct 09, 2021 11:27 am

Hi,

I recently got a Baofeng DM-1801 and updated to the OpenGD77 firmware (Jul. 11 2021 release). However, I realized that there is a newer firmware (Oct. 2 2021) available so when I tried updating the firmware through the CPS, it seemed to be successful but upon checking the Firmware Info on my radio, it still shows the firmware as Jul 11. 2021. Therefore, none of the newer features (satellite, position, etc) are on my radio.
I tried loading & updating the firmware several times but there was still no change.
I'm using Windows 10 and the latest GD77 CPS (Version E2021.09.14.01).

Hope I can get some support on this issue.

Thanks and 73,
Karl 9W2IXY

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: DM-1801 not updating to latest firmware

Post by Fecskebeka » Sat Oct 09, 2021 11:44 am

Hello

Use this
https://www.opengd77.com/downloads/PublicBeta_20211002/

I also have a dm1801. Several pieces.
It works
I updated the firmware dated July 11, 2021
Or there must be another problem

Greetings
Zs

9W2IXY
Posts: 2
Joined: Sat Oct 09, 2021 11:19 am

Re: DM-1801 not updating to latest firmware

Post by 9W2IXY » Sat Oct 09, 2021 12:01 pm

Thank you very much for the quick response!
I downloaded the firmware and it now works! Looks like I was using the wrong link from an older post to download the firmware.

Thanks and 73,
Karl 9W2IXY

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: DM-1801 not updating to latest firmware

Post by Fecskebeka » Sat Oct 09, 2021 12:57 pm

Hooray!

;) :)
73

ve2wkr
Posts: 65
Joined: Thu Oct 22, 2020 11:29 pm
Location: Silverthorne, Colorado, USA

Re: DM-1801 not updating to latest firmware

Post by ve2wkr » Mon Oct 18, 2021 3:53 pm

yes, I had the same problem.
I figured out that you must use the latest CPS for the firmware to load properly.
73's
Luca

Post Reply