WHAT CPS TO USE TO CODEPLUG OPENDM1801 ?

Anything specifically related to the DM-1801 version of the firmware
Post Reply
User avatar
Zl1XE
Posts: 110
Joined: Fri Jul 24, 2020 12:25 am

Re: WHAT CPS TO USE TO CODEPLUG OPENDM1801 ?

Post by Zl1XE » Mon Sep 07, 2020 9:43 am

Its the same CPS.
Two methods of uploading - firmware or codeplug.
Firmware (under Extras) requires you to hold down SK1 and SK2 when booting the radio. Display should be blank and unlit.
The usb id is used (HID) so no special installer required (assuming win10)

For the codeplug - when the cps is installed it will prompt you for a driver install. This is for codeplug read/write.
Radio turned on normally for codeplug transfers - also Extras menu - read/write codeplug.
please see manual for more detail.

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: WHAT CPS TO USE TO CODEPLUG OPENDM1801 ?

Post by F1RMB » Tue Sep 08, 2020 6:04 pm

Hi,

So you probably have a problem with the serial driver installation.


Cheers.
---
Daniel

Post Reply