APRS beacon testers needed
Re: APRS beacon testers needed
How does the GPS log setting work ?
Yesterday when I out walking I had the log activated and I got a good track on aprs.fi but today I tried download data via CPS, but nothing
was saved in the prompted directory.
Is data cleared if you disable GPS or APRS ?
Some of my moves where via subway and tram.
Yesterday when I out walking I had the log activated and I got a good track on aprs.fi but today I tried download data via CPS, but nothing
was saved in the prompted directory.
Is data cleared if you disable GPS or APRS ?
Some of my moves where via subway and tram.
Re: APRS beacon testers needed
When the GPS is set to Log it should constantly log data, however I only tested by turning the log on and off at the beginning and end of when I wanted to log
The log should automatically be opened and closed when the radio is turned on and off, if log is enabled, however I didn't test this recently.
I will retest the logging.
FYI.
The log uses 2Mb of the Flash memory, as a cyclic buffer. Every time logging is started, a marker is saved to the flash memory, and then the G*RMC lines are logged every second, and once per minute all NMEA lines are logged for 1 second.
I don't log all NMEA lines all the time, because it consumes too much memory and normally its not important to record the other NMEA lines e.g. the satellite RSSI data.
When the CPS reads the NMEA data from the radio it reads all 2Mb and searches for the Start and End markers for each individual log, and saves each log as a separate file.
Re: APRS beacon testers needed
Thanks, got a log for yesterday (2023-10-08) but I couldn't plot via downloads/map.htmlVK3KYY wrote: ↑Sun Oct 08, 2023 10:50 pmWhen the GPS is set to Log it should constantly log data, however I only tested by turning the log on and off at the beginning and end of when I wanted to log
The log should automatically be opened and closed when the radio is turned on and off, if log is enabled, however I didn't test this recently.
I will retest the logging.
FYI.
The log uses 2Mb of the Flash memory, as a cyclic buffer. Every time logging is started, a marker is saved to the flash memory, and then the G*RMC lines are logged every second, and once per minute all NMEA lines are logged for 1 second.
I don't log all NMEA lines all the time, because it consumes too much memory and normally its not important to record the other NMEA lines e.g. the satellite RSSI data.
When the CPS reads the NMEA data from the radio it reads all 2Mb and searches for the Start and End markers for each individual log, and saves each log as a separate file.
But it worked fine with https://www.gpsvisualizer.com/
Re: APRS beacon testers needed
I forgot to update the map viewer to handle some changes I made to the dataSA0BUX wrote: ↑Mon Oct 09, 2023 5:33 amThanks, got a log for yesterday (2023-10-08) but I couldn't plot via downloads/map.htmlVK3KYY wrote: ↑Sun Oct 08, 2023 10:50 pmWhen the GPS is set to Log it should constantly log data, however I only tested by turning the log on and off at the beginning and end of when I wanted to log
The log should automatically be opened and closed when the radio is turned on and off, if log is enabled, however I didn't test this recently.
I will retest the logging.
FYI.
The log uses 2Mb of the Flash memory, as a cyclic buffer. Every time logging is started, a marker is saved to the flash memory, and then the G*RMC lines are logged every second, and once per minute all NMEA lines are logged for 1 second.
I don't log all NMEA lines all the time, because it consumes too much memory and normally its not important to record the other NMEA lines e.g. the satellite RSSI data.
When the CPS reads the NMEA data from the radio it reads all 2Mb and searches for the Start and End markers for each individual log, and saves each log as a separate file.
But it worked fine with https://www.gpsvisualizer.com/
Can you try this updated page
downloads/mapviewer/
Re: APRS beacon testers needed
Same, just a grey window, I tried with Chrome,Edge and Firefox.VK3KYY wrote: ↑Mon Oct 09, 2023 6:43 amI forgot to update the map viewer to handle some changes I made to the dataSA0BUX wrote: ↑Mon Oct 09, 2023 5:33 amThanks, got a log for yesterday (2023-10-08) but I couldn't plot via downloads/map.htmlVK3KYY wrote: ↑Sun Oct 08, 2023 10:50 pm
When the GPS is set to Log it should constantly log data, however I only tested by turning the log on and off at the beginning and end of when I wanted to log
The log should automatically be opened and closed when the radio is turned on and off, if log is enabled, however I didn't test this recently.
I will retest the logging.
FYI.
The log uses 2Mb of the Flash memory, as a cyclic buffer. Every time logging is started, a marker is saved to the flash memory, and then the G*RMC lines are logged every second, and once per minute all NMEA lines are logged for 1 second.
I don't log all NMEA lines all the time, because it consumes too much memory and normally its not important to record the other NMEA lines e.g. the satellite RSSI data.
When the CPS reads the NMEA data from the radio it reads all 2Mb and searches for the Start and End markers for each individual log, and saves each log as a separate file.
But it worked fine with https://www.gpsvisualizer.com/
Can you try this updated page
downloads/mapviewer/
Re: APRS beacon testers needed
Did you see the file selector on the right
Re: APRS beacon testers needed
You have to load the file first.
Re: APRS beacon testers needed
I'm not sure why you are getting that error.
I'm using Firefox and it works fine for me
Line 41 is
let s = nmea.split(".");
in
and nmea is being passed into that function
Try Chrome
I'm using Firefox and it works fine for me
Line 41 is
let s = nmea.split(".");
in
Code: Select all
function getDegs(nmea)
{
let s = nmea.split(".");
let d = s[0];
let degs = d.substr(0, d.length - 2);
return parseFloat(degs);
}
Try Chrome