Feature-Request: 255 "User Power" steps
Posted: Sun Aug 01, 2021 7:58 am
At my investigation about TX Power and calibration is had an idea.
At Radio Power calibration i have to open the calibration screen change the value per frequency and write it to the flash to test is.
and this many many times. This is very time intense procedure. And generates a lot of write cycles to the flash.
What about changing the user power stepts to 16 (DAC-Value)? (right now it is fast 100 and slow 10)
And show it as 0-255 value at the "UserPower" filed as at the calibration screen.
Example: "User P: 1648/103"
Steps slow (Blue+left/right): 16/1
Steps fast (left/right): 160/10
What you can do then is set the radio to +W- and find the correct value fast and for all frequencies and power levels very fast and with just one write cycle to the flash at the end.
At Radio Power calibration i have to open the calibration screen change the value per frequency and write it to the flash to test is.
and this many many times. This is very time intense procedure. And generates a lot of write cycles to the flash.
What about changing the user power stepts to 16 (DAC-Value)? (right now it is fast 100 and slow 10)
And show it as 0-255 value at the "UserPower" filed as at the calibration screen.
Example: "User P: 1648/103"
Steps slow (Blue+left/right): 16/1
Steps fast (left/right): 160/10
What you can do then is set the radio to +W- and find the correct value fast and for all frequencies and power levels very fast and with just one write cycle to the flash at the end.