Codeplug - AUSTRIA Version
Posted: Tue Jul 20, 2021 5:18 pm
Hi,
to contribute at least a small piece of work and because I couldn't find any code plugs for Austria / OE-Region, here is my take on a universal opengd77 codeplug. It is based on the 10.07.2021 opengd77 firmware release + rev.4.3.6 of the original fw. + opengd77 CPS D:2021.06.10.01.
This is work in progress and I will upload new versions when I add or change things.
Contacts are all OE DMR contacts that existed at the time of import plus a couple of IDs from other countries that I looked up.
Basically the zones reflect the nine states, OE1 to OE9 plus one DE zone for german repeaters close to the border. I created also some special zones for the OE2 region, which I found useful at the beginning but with the OE1 to OE9 zone concept these are sort of obsolete.
Channels: For each repeater there is one channel per mode/band (DMR, 2m, 70cm). I tried to create a system for self explanatory channel names.
"OE2XZR Gaisberg" --> blank between callsign and name means it's a DMR repeater
"OE2XZR.Gaisberg" --> dot between callsign and name means, it's a 2m FM repeater
"OE2XPR:Haunsberg" --> colon between callsign and name means, it's a 70cm FM repeater
"OE5XFN;Frankenm" --> semicolon between callsign and name means it's a 2m/70cm crossband repeater
"OE5XDM:Dachs1750" --> 1750 in the name means, this repeater needs 1750 tone to open.
Currently most repaters from OE2, OE5, OE6, OE7 and OE8 are programmed. OE1, OE9 and missing repeaters from other states will be added soon.
In addition there are a couple of german repeaters which are close to the border.
The PWR ON audio currently cw's my call. You can change that easily in CPS.
Feel free to use, comment, change to your needs.....
Don't forget to change the DMR ID to your own ID.
Regards
Holger
to contribute at least a small piece of work and because I couldn't find any code plugs for Austria / OE-Region, here is my take on a universal opengd77 codeplug. It is based on the 10.07.2021 opengd77 firmware release + rev.4.3.6 of the original fw. + opengd77 CPS D:2021.06.10.01.
This is work in progress and I will upload new versions when I add or change things.
Contacts are all OE DMR contacts that existed at the time of import plus a couple of IDs from other countries that I looked up.
Basically the zones reflect the nine states, OE1 to OE9 plus one DE zone for german repeaters close to the border. I created also some special zones for the OE2 region, which I found useful at the beginning but with the OE1 to OE9 zone concept these are sort of obsolete.
Channels: For each repeater there is one channel per mode/band (DMR, 2m, 70cm). I tried to create a system for self explanatory channel names.
"OE2XZR Gaisberg" --> blank between callsign and name means it's a DMR repeater
"OE2XZR.Gaisberg" --> dot between callsign and name means, it's a 2m FM repeater
"OE2XPR:Haunsberg" --> colon between callsign and name means, it's a 70cm FM repeater
"OE5XFN;Frankenm" --> semicolon between callsign and name means it's a 2m/70cm crossband repeater
"OE5XDM:Dachs1750" --> 1750 in the name means, this repeater needs 1750 tone to open.
Currently most repaters from OE2, OE5, OE6, OE7 and OE8 are programmed. OE1, OE9 and missing repeaters from other states will be added soon.
In addition there are a couple of german repeaters which are close to the border.
The PWR ON audio currently cw's my call. You can change that easily in CPS.
Feel free to use, comment, change to your needs.....
Don't forget to change the DMR ID to your own ID.
Regards
Holger