Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios
https://www.opengd77.com/
Hardware glich caused because RF is being injected back inside the radio via the USB cable.EU1AEQ wrote: ↑Thu Aug 11, 2022 7:02 amHello.
Suddenly, the screen turned over today. This has not been observed for a very long time. I use 1801 with mmdvmhost on WIN7.
I turned on the station, after turning it on it worked correctly, launched mmdvm, the connection with brandmeister was established, but I could not sell anything. Nothing happened in the console when PTT was pressed. I looked at 1801, the screen is upside down. Turned off/turned on 1801, everything worked.
It's unlikely. It has been working in this mode for several months every day. I use it at work as a DMR node, 250 mW.VK3KYY wrote: ↑Thu Aug 11, 2022 7:36 amHardware glich caused because RF is being injected back inside the radio via the USB cable.EU1AEQ wrote: ↑Thu Aug 11, 2022 7:02 amHello.
Suddenly, the screen turned over today. This has not been observed for a very long time. I use 1801 with mmdvmhost on WIN7.
I turned on the station, after turning it on it worked correctly, launched mmdvm, the connection with brandmeister was established, but I could not sell anything. Nothing happened in the console when PTT was pressed. I looked at 1801, the screen is upside down. Turned off/turned on 1801, everything worked.
Ok, it is likely that it is so not all of us we have the same ideas (thank goodness) I like simple and comfortable use possibly with one hand, others using more keys to achieve the goal ....
Seems that I have activated timeslot override , probably with the * button on my MD-9600 ,problem is that a long press on P4 or * doesn'tVK3KYY wrote: ↑Tue Aug 09, 2022 9:11 pmIf you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)
To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *
SA0BUX wrote: ↑Mon Aug 22, 2022 10:07 amSeems that I have activated timeslot override , probably with the * button on my MD-9600 ,problem is that a long press on P4 or * doesn'tVK3KYY wrote: ↑Tue Aug 09, 2022 9:11 pmIf you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)
To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *
clear the function, the TS symbol is still inverted.
/SA0BUX
Which build is that ?
Inverted symbol means TS filter is disabled. This is something different.