Page 1 of 2

New GD77 Beta - August 3 2022

Posted: Tue Aug 02, 2022 10:29 pm
by VK3KYY
There is a new GD77/DM1801/RD5R Beta version available

downloads/GD77/bca0d61bd5cc483853496e8bf0a4ee1b1d0e94bd

There were a few mistakes in the last Beta.

* The Channel mode , Reverse Repeater Lock function (Long press of #), had somehow been removed.
* The RD5R version was not fully updated in the last Beta because a problem prevented that version being compiled and I didn't notice that the binary had not been updated.

Re: New GD77 Beta - August 3 2022

Posted: Wed Aug 03, 2022 1:55 pm
by W1CY
Thanks!

Re: New GD77 Beta - August 3 2022

Posted: Wed Aug 03, 2022 8:48 pm
by IZ2EIB
Thanks a lot Roger!

73 best regards de Fabio IZ2EIB

Re: New GD77 Beta - August 3 2022

Posted: Fri Aug 05, 2022 7:36 am
by m1dyp
thank you

Re: New GD77 Beta - August 3 2022

Posted: Fri Aug 05, 2022 4:20 pm
by n7rde
Thanks
Seems to work great
Ron N7RDE

Re: New GD77 Beta - August 3 2022

Posted: Mon Aug 08, 2022 9:43 pm
by I1KDO
Hi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions

Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off

See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo

Re: New GD77 Beta - August 3 2022

Posted: Tue Aug 09, 2022 12:04 am
by VK3KYY
I1KDO wrote:
Mon Aug 08, 2022 9:43 pm
Hi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions

Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off

See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo
Changes to TS by pressing * are always to both Tx and Rx. Operating the radio where the Rx and Tx TS are different is totally non standard.
Your suggestion would remove fundamental functionality.

Re: New GD77 Beta - August 3 2022

Posted: Tue Aug 09, 2022 8:27 pm
by I1KDO
HI Roger
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible

Tnx
73 Lorenz

Re: New GD77 Beta - August 3 2022

Posted: Tue Aug 09, 2022 9:11 pm
by VK3KYY
I1KDO wrote:
Tue Aug 09, 2022 8:27 pm
HI Roger
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible

Tnx
73 Lorenz
OK.

You mean,
Long press * in DMR mode to toggle TS filter

I think possibly long press * already has the function to disable the TS override

When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS
E.g.

Channel A is TS 2
Channel B is TS 1

If you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)

To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *

Re: New GD77 Beta - August 3 2022

Posted: Wed Aug 10, 2022 10:08 pm
by I1KDO
When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS, ......

in this function it is also possible to disable the Filter so that it is exclusively on the desired TS and no longer receives the other?