OpenGD77

Mine just starts scanning again. DMR being received is clear as day. As soon as transmission stops, my HT goes to FM mode and static, as soon as I let go, it starts scanning again

For sure you have to stop the scan.

666lord666 wrote: ↑

Fri Feb 25, 2022 7:05 pm

...
Can You kindly explain what happened with CC filter.
...

had been reported in Release Candidate (2022 02 20): https://opengd77.com/viewtopic.php?f=13&t=2114
"* CC Filter option has been removed from the Quick Menu, because on some radios constantly scanning for the CC seems to cause problems with the C6000 DMR chip which results in the firmware crashing."

and there is more about CC Filter in this link above

73's de OE1MWW
Wolfgang

Thanks to Ik0nwg for finding and reporting a crash bug in this release

There will be another new release today with some fixes

666lord666 wrote: ↑

Sat Feb 26, 2022 12:11 pm

I have a lot of channels in scan list can it automatically scan CC too for each received transmission at any channel?

If you are scanning channels then you should always set the CC of the channel to the CC of the signal you wish to receive.

If you are saving that the same channel ( frequency ) has transmissions with different CC, then these are not Amateur Radio signals, and this firmware is for Amateur Radio use.

The reason for the CC scan in Monitor mode is for Amateur Radio operators who are perhaps on holiday in a new area, to find local repeaters.

Once the CC of the repeater has been scanned, mainly using the VFO, the VFO frequency can be used to create a new Channel for that repater.

There is a new Release Candidate to fix a crash bug

See viewtopic.php?f=13&t=2130