Public Beta (2021 11 17)

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Public Beta (2021 11 17)

Post by Fecskebeka » Fri Nov 19, 2021 11:43 pm

Another case
Two radio DMR simplex, default setting. Filters "on".
The two radios communicate.

On the Rx receiver, I turn off the Quick Menu, CC filter. ("off")
You can't hear the other one like that anymore.
I'm switching the CC filter back in vain. ("on")
Still can't hear.
I turn off the radio completely.
Then back. (Power on)
You can hear it now.
The CC filter is "on".



I was still pushing a little :)

It is also related to the DMR filter.
If the DMR filter is also off. And CC filter: "off"
Then you can hear it.

When the DMR filter is on. And CC filter: "off"
I turn the radio off and on.
The first broadcast is heard and then muted.

???

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Public Beta (2021 11 17)

Post by Fecskebeka » Sat Nov 20, 2021 9:58 am

Scan mode
eco 2
brightnest 2%
Min. brightnest 0%
Mode: auto

After a while, the display lights up continuously
FM Rx radio reception was fine

Mode: ->other -> auto
The backlight works again
It shuts down

I haven't been able to regenerate the error since

73

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Public Beta (2021 11 17)

Post by F1RMB » Sat Nov 20, 2021 11:06 am

Fecskebeka wrote:
Sat Nov 20, 2021 9:58 am
Scan mode
eco 2
brightnest 2%
Min. brightnest 0%
Mode: auto

After a while, the display lights up continuously
FM Rx radio reception was fine

Mode: ->other -> auto
The backlight works again
It shuts down

I haven't been able to regenerate the error since

73
Which scan mode (Channel or VFO) ?
Also, Auto backlight in FM is based on valid signal receiving, that means anytime the squelch is opening the backlight is triggered, hence if your squelch level is too low it will light the screen up too often.

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Public Beta (2021 11 17)

Post by Fecskebeka » Sat Nov 20, 2021 12:44 pm

Sorry,
Channel mode
90ms 24 Uhf channels Squelch: master
Squelch: 65%
There were longer breaks. Minutes.
Green LED was not active either.
I intentionally did not do power off. Do not have a system reboot.
Rather, I touched on my mode setting.

I have never experienced this before.
He's been running now ever since, falling asleep.
F1RMB wrote:
Sat Nov 20, 2021 11:06 am
Which scan mode (Channel or VFO) ?
Also, Auto backlight in FM is based on valid signal receiving, that means anytime the squelch is opening the backlight is triggered, hence if your squelch level is too low it will light the screen up too often.

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Public Beta (2021 11 17)

Post by F1RMB » Sun Nov 21, 2021 7:24 am


Locked