New GD77 Beta - August 3 2022

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Wed Aug 10, 2022 10:14 pm

If there are transmissions on both TS , some people may want to change which TS they are listening to, without disabling TS filter.
I think this used often
So useing * to disable TS filter would cause annoyance to many people

EU1AEQ
Posts: 141
Joined: Sat Jan 30, 2021 7:25 pm

Re: New GD77 Beta - August 3 2022

Post by EU1AEQ » Thu Aug 11, 2022 7:02 am

Hello.
Suddenly, the screen turned over today. This has not been observed for a very long time. I use 1801 with mmdvmhost on WIN7.
I turned on the station, after turning it on it worked correctly, launched mmdvm, the connection with brandmeister was established, but I could not sell anything. Nothing happened in the console when PTT was pressed. I looked at 1801, the screen is upside down. Turned off/turned on 1801, everything worked.

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Thu Aug 11, 2022 7:36 am

EU1AEQ wrote:
Thu Aug 11, 2022 7:02 am
Hello.
Suddenly, the screen turned over today. This has not been observed for a very long time. I use 1801 with mmdvmhost on WIN7.
I turned on the station, after turning it on it worked correctly, launched mmdvm, the connection with brandmeister was established, but I could not sell anything. Nothing happened in the console when PTT was pressed. I looked at 1801, the screen is upside down. Turned off/turned on 1801, everything worked.
Hardware glich caused because RF is being injected back inside the radio via the USB cable.

EU1AEQ
Posts: 141
Joined: Sat Jan 30, 2021 7:25 pm

Re: New GD77 Beta - August 3 2022

Post by EU1AEQ » Thu Aug 11, 2022 8:26 am

VK3KYY wrote:
Thu Aug 11, 2022 7:36 am
EU1AEQ wrote:
Thu Aug 11, 2022 7:02 am
Hello.
Suddenly, the screen turned over today. This has not been observed for a very long time. I use 1801 with mmdvmhost on WIN7.
I turned on the station, after turning it on it worked correctly, launched mmdvm, the connection with brandmeister was established, but I could not sell anything. Nothing happened in the console when PTT was pressed. I looked at 1801, the screen is upside down. Turned off/turned on 1801, everything worked.
Hardware glich caused because RF is being injected back inside the radio via the USB cable.
It's unlikely. It has been working in this mode for several months every day. I use it at work as a DMR node, 250 mW.

I1KDO
Posts: 27
Joined: Sat Nov 16, 2019 7:49 am

Re: New GD77 Beta - August 3 2022

Post by I1KDO » Thu Aug 11, 2022 9:20 am

VK3KYY wrote:
Wed Aug 10, 2022 10:14 pm
If there are transmissions on both TS , some people may want to change which TS they are listening to, without disabling TS filter.
I think this used often
So useing * to disable TS filter would cause annoyance to many people
Ok, it is likely that it is so not all of us we have the same ideas (thank goodness) I like simple and comfortable use possibly with one hand, others using more keys to achieve the goal ....
Sorry if I made you waste time for other new jobs
73 Lorenzo

BG2FGS
Posts: 1
Joined: Mon Aug 15, 2022 8:20 am

Re: New GD77 Beta - August 3 2022

Post by BG2FGS » Mon Aug 15, 2022 8:26 am

So far so good! No bugs have been identified for now!Thanks for the effort.73 from Chinese fans

SA0BUX
Posts: 544
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: New GD77 Beta - August 3 2022

Post by SA0BUX » Mon Aug 22, 2022 10:07 am

VK3KYY wrote:
Tue Aug 09, 2022 9:11 pm
If you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)

To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *
Seems that I have activated timeslot override , probably with the * button on my MD-9600 ,problem is that a long press on P4 or * doesn't
clear the function, the TS symbol is still inverted.

/SA0BUX

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Mon Aug 22, 2022 10:19 am

SA0BUX wrote:
Mon Aug 22, 2022 10:07 am
VK3KYY wrote:
Tue Aug 09, 2022 9:11 pm
If you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)

To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *
Seems that I have activated timeslot override , probably with the * button on my MD-9600 ,problem is that a long press on P4 or * doesn't
clear the function, the TS symbol is still inverted.

/SA0BUX

I've tested on my MD9600 and the TS override is cleared either by long press on * on the mic or long press on P4

SA0BUX
Posts: 544
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: New GD77 Beta - August 3 2022

Post by SA0BUX » Mon Aug 22, 2022 10:46 am

VK3KYY wrote:
Mon Aug 22, 2022 10:19 am

I've tested on my MD9600 and the TS override is cleared either by long press on * on the mic or long press on P4
Which build is that ?

I have Jul 28 2022 21:18:19 installed

And nothing happens at all except a short blip when I do long press on the mic or P4

Is an inverted TS1/TS2 symbol an indication on this function or is it something else I have done ?

In channel details the radio display the correct timeslot that I have programmed in the CPS.

Maybe a reset of settings may work ?

VK3KYY
Posts: 7484
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New GD77 Beta - August 3 2022

Post by VK3KYY » Mon Aug 22, 2022 10:48 am

SA0BUX wrote:
Mon Aug 22, 2022 10:46 am
Is an inverted TS1/TS2 symbol an indication on this function or is it something else I have done ?
Inverted symbol means TS filter is disabled. This is something different.
Press the Orange button, and goto the TS filter setting and enable it.


FYI.
Bold means TS override is enabled.

This is documented in the User Guide, but perhaps its not explained clearly

https://github.com/LibreDMR/OpenGD77_Us ... .md#filter

Post Reply