Public Beta (2021 11 21)

lu2efi
Posts: 13
Joined: Thu Dec 05, 2019 5:54 pm

Re: Public Beta (2021 11 21)

Post by lu2efi » Wed Nov 24, 2021 12:03 pm

No problems so far here.
Thanks for your work!

kt4lh
Posts: 189
Joined: Sun Jan 12, 2020 4:27 am

Re: Public Beta (2021 11 21)

Post by kt4lh » Wed Nov 24, 2021 3:14 pm

Same, been using the Nov 21 build for a few days now, mostly monitoring, and no problems I've noted.

py2kk
Posts: 2
Joined: Wed Nov 03, 2021 6:34 pm

Re: Public Beta (2021 11 21)

Post by py2kk » Wed Nov 24, 2021 4:29 pm

This version is spectacular, several GD-77 radios with this firmware 2021-11-21, in my concept it can already be called Release candidate version or gold version.
Thank you for the magnificent work, 73

py2kk
Posts: 2
Joined: Wed Nov 03, 2021 6:34 pm

Re: Public Beta (2021 11 21)

Post by py2kk » Thu Nov 25, 2021 2:46 pm

Everything works great. GD-77 connected at 82 hours all normal, DMR - Satellite.
Thank you, good job Roger and Daniel.
Good health, 73!

F6GVE
Posts: 83
Joined: Sat Nov 16, 2019 8:52 am

Re: Public Beta (2021 11 21)

Post by F6GVE » Thu Nov 25, 2021 6:03 pm

Thanks a lot for all what is done, that means a lot of work I know

But sorry I still have the bug with this Beta that I tried to explain recently.
When the TS filter is "off" I have a delay before the DMR channel to be decoded

The best is to show you :
https://youtu.be/iJ4IgEVOMXA

Ecolevel is set "0"

73
Using two early GD77

User avatar
F1RMB
Posts: 1311
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Public Beta (2021 11 21)

Post by F1RMB » Thu Nov 25, 2021 6:10 pm

Hi Luc,
F6GVE wrote:
Thu Nov 25, 2021 6:03 pm
Thanks a lot for all what is done, that means a lot of work I know

But sorry I still have the bug with this Beta that I tried to explain recently.
When the TS filter is "off" I have a delay before the DMR channel to be decoded

The best is to show you :
https://youtu.be/iJ4IgEVOMXA

Ecolevel is set "0"

73
That's normal, one TS is checked at a time, hence ~2.5 seconds is needed to synchronize (or fail to, then switch to the other one).
You can force the TS selection by hand (instant TS toggling), pressing (long or not) the STAR key.


Cheers.
---
Daniel
73 de Daniel.

F6GVE
Posts: 83
Joined: Sat Nov 16, 2019 8:52 am

Re: Public Beta (2021 11 21)

Post by F6GVE » Thu Nov 25, 2021 6:30 pm

Hello Daniel
The matter is that with the last stable version (from July I think) I do not have this delay, the DMR is instantly decoded, no matter if the TS filter is set on ON or OFF. For my use this is a regression...
Using two early GD77

User avatar
F1RMB
Posts: 1311
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Public Beta (2021 11 21)

Post by F1RMB » Thu Nov 25, 2021 6:39 pm

Hi Luc,
F6GVE wrote:
Thu Nov 25, 2021 6:30 pm
Hello Daniel
The matter is that with the last stable version (from July I think) I do not have this delay, the DMR is instantly decoded, no matter if the TS filter is set on ON or OFF. For my use this is a regression...
Yes, it was, but the DMR decoding layer had a lot of problems. A lot of the code was rewritten to fix this, as the HRC-6000 is NOT able to handle the two TS at the same time (and that was the case previously). One the visible problems was the corruption of TG/PC and DMR ID when receiving two TS on the same frequency.
So, no, it's not a regression, it's a cleaner way to manage the timeslots, without messing up the whole thing up ;-)
73 de Daniel.

F6GVE
Posts: 83
Joined: Sat Nov 16, 2019 8:52 am

Re: Public Beta (2021 11 21)

Post by F6GVE » Thu Nov 25, 2021 6:47 pm

At least the scanning seems to be OK now, so this "trouble" is less important than in the previous beta.
I will keep this beta version on my two GD77 and see if it really annoys me. Apart from that everything seems to perfectly work
You all made a fabulous job, congrats really
Using two early GD77

Post Reply